CRU Dataport DE110 Manuel d'installation - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} CRU Dataport DE110. CRU Dataport DE110 2 pages. Usb 2.0-to-sata/ide

Imprimer la page

CRU Dataport DE110 Manuel d'installation

4. Locate a spare 9-Pin USB connector on the system motherboard and connect

the female connector on the split USB cable (provided) to it (figure 3).

Typical System Motherboard (your system may vary)

Connect to

Front USB

Port Cable

(if applicable)

Front USB

Port Cable

Figure 3: Connecting the Split USB Cable to the System

5. If your system motherboard has only one 9-Pin USB connector and it is con-

nected to the front USB ports, disconnect the front USB port cable from the

system motherboard USB connector. Connect the female connector on the

split USB cable (provided) to the newly vacated USB connector located on the

system motherboard (figure 3). If applicable, connect the male connector on the

split USB cable to the front USB port cable (figure 3). Make sure the red wires

on both cable are correctly aligned.

Note: Connecting the DE110 to the system motherboard's only USB connec-

tor will disable one of the front USB ports (if applicable). Only the lower (or

second) USB port will still function while the DE110 is installed.

6. If your system motherboard has only a spare 4-Pin USB connector, connect the

female connector on the split USB cable (provided) to it. The female connector on the

split USB cable has two rows of wires, a 5-wire row and a 4-wire row. Make sure to

connect the 5-wire row to the system montherboard's 4-Pin USB connector (refer to

your system motherboard manufacturer's documentation for information on the pin

assignments.)

Note: When connecting the 5-wire row to the 4-pin USB connector, make sure

that the wires on the cable correspond to the appropriate pins (refer to your

system montherboard manufacturer's documentation for information on pin

assignments).

7. Install the DE110 receiving frame into the computer.

8. Connect the remaining end of the split USB cable to the DE110 USB connector

located on the receiving frame motherboard (figure 1).

9. Connect the power cable from the DC power supply in the computer or expan-

sion chassis to the power connector on the DE110 receiving frame. Refer to

figure 1 for the DE110 receiving frame power connector location.

Connect to

DE110 USB

Connector

Connect to

Motherboard

USB Connector

Rugged, Reliable, Mobile, Secure

Unit ID Select Switch Settings

Note: The unit ID number display is for ID display purposes only.

The following table lists the unit ID select switch settings.

Selecting the Unit ID Number: Use the alignment tool (provided) to select the ID

number of the disk drive.

Note: The lock on the Data Express receiving frame functions as a lock and a DC

power switch for the carrier unit. The lock MUST be engaged (turned counter-

clockwise) in order to supply power to the carrier and installed drive unit.

Drive Carrier

Guide

Limited Product Warranty

CRU-DataPort (CRU) warrants the Data Express DE110 to be free of significant defects

in material and workmanship for a period of one year from the original date of purchase.

CRU's warranty is nontransferable and is limited to the original purchaser.

Limitation of Liability

The warranties set forth in this agreement replace all other warranties. CRU expressly

disclaims all other warranties, including but not limited to, the implied warranties of

merchantability and fitness for a particular purpose and non-infringement of third-party

rights with respect to the documentation and hardware. No CRU dealer, agent or em-

ployee is authorized to make any modification, extension, or addition to this warranty.

In no event will CRU or its suppliers be liable for any costs of procurement of substitute

products or services, lost profits, loss of information or data, computer malfunction, or

any other special, indirect, consequential, or incidental damages arising in any way out

of the sale of, use of, or inability to use any CRU product or service, even if CRU has

been advised of the possibility of such damages. In no case shall CRU's liability exceed

the actual money paid for the products at issue. CRU reserves the right to make modi-

fications and additions to this product without notice or taking on additional liability.

Certification

EMI Standard:

FCC Part 15 Class B, CE

EMC Standard:

EN55022, EN55024

FCC Certification

This device has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received; including interfer-

ence that may cause undesired operation.

1-800-260-9800

Unit ID Select

Rotating Switch

Typical Data Express

Receiving Frame

A7-110-0006 Rev. 1