CRU WiebeTech Ditto Manuel de démarrage rapide - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} CRU WiebeTech Ditto. CRU WiebeTech Ditto 2 pages. Pcie adapter bundles

Imprimer la page
2
CRU WiebeTech Ditto PCIe Adapter Bundle Quick Start Guide

1 IDENTIFYING PARTS

MSATA-TO-SATA
ADAPTER
DITTO PCIE X1 SLOT ADAPTER*
DITTO DX PCIE X4 SLOT ADAPTER*
*Slot adapters are bundled separately from each other
Protecting Your Digital Assets
TM
M.2 ADAPTER CARD
CRU WiebeTech Ditto PCIe Adapter Bundle Quick Start Guide

2 HARDWARE SETUP

Follow the relevant instructions for the device you wish to connect to your Ditto or Ditto DX
Forensic FieldStation.
STOP!
Do
NOT
connect the PCIe Slot Adapter or any PCIe device to a Ditto or Ditto DX
Forensic FieldStation while the Ditto unit is powered on. Doing so can damage the
adapter, your device, or the Ditto unit itself.
2.1 MSATA DEVICES
a. Connect the mSATA device to the mSATA-to-SATA adapter.
b. Attach a SATA data cable from the Ditto or Ditto DX Forensic FieldStation to the adapter.
c. Attach the adapter to a SATA power cable connected into the Ditto.
d. Turn on the Ditto. Your device will be detected by the Ditto as soon as it powers up.
2.2 M.2 AHCI/SATA DEVICES
a. Connect the M.2 AHCI device to the M.2 AHCI connector on the M.2 Adapter Card.
b. Attach a SATA data cable from the Ditto or Ditto DX Forensic FieldStation to the adapter.
c. Insert the M.2 Adapter Card into the PCIe slot connector on the PCIe Slot Adapter.
d. Insert the ribbon PCIe connector from the PCIe Slot Adapter into an expansion port on
the Ditto.
NOTE
Both PCIe Slot Adapters will only provide power to the M.2 AHCI device. Data for
M.2 AHCI devices is passed through the SATA data connector.
e. Turn on the Ditto. Your device will be detected by the Ditto as soon as it powers up.
2.3 M.2 NVME DEVICES
a. Connect the M.2 NVMe device to the M.2 NVMe connector on the M.2 Adapter Card.
b. Insert the M.2 Adapter Card into the PCIe slot connector on the PCIe Slot Adapter.
c. Insert the ribbon PCIe connector from the PCIe Slot Adapter into an expansion port on
the Ditto.
d. Turn on the Ditto. Your device will be detected by the Ditto as soon as it powers up.
3
CRU Mark
10.25.12
PMS 711
2 cyan
85 magenta
76 yellow