CrucialTrak Enroll Manuel de dépannage - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de dépannage pour {nom_de_la_catégorie} CrucialTrak Enroll. CrucialTrak Enroll 6 pages.

How to fix 'not working Relay & Wiegand'

Major causes

• Too short signal length for lock device

• Not customized signals for Control panels or readers

• Make sure relay working with recognition success, please hear tick sound.

• If it works, try to increase relay signal time on IO setup page.

(get right information from lock device manufacturers)

• For wiegand, figure out right high signal length and interval of pulse from control panel and rfid

reader manufacturers. And according to those information, adjust signal on IO setup page.

• For additional card types, let CTK know card information with sample card. (discuss with RSM)

How to fix 'bad wiring'

Major causes

• Poor connecting

• Continuous vibration

Quattros on speed gate are getting stressed by vibration of Gate.

So untighten wire sometimes be felled out from mail type 30p socket.

• Please tie cables and fix near structure in order not to be felled out.

• Make sure whether copper part of cables is well contacted with metal inside socket.

• Recommend that let electrical experts do wiring.

Cleaning Quattro, Duo & Enroll Station

• Always keep dome cover, fingerprint lens & palm vein sensor clean

- Wipe dome cover daily with a soft & dry cloth. (Do not use liquids with alcohol or acidity)

•

• Do not use brush to remove dust, please suck dust on fans, holes and slits of device by using

vacuum cleaner carefully.