Cruise control AP900Ci Manuel d'installation rapide - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation rapide pour {nom_de_la_catégorie} Cruise control AP900Ci. Cruise control AP900Ci 11 pages.

5
INIT ADJUSTMENT
With the init can be adjusted how aggressive or slow the limit speed is reached.
When the init is set to high, it will first go over the limit speed and then slow down again and stabilize at
the limit speed. When the init is set to low, it will first slow down a bit and then stabilize at the limit speed
Switch ignition ON.
(don't start the
engine)
3X
LOW
Press 3x RES key
(press CM down 3x)
LOWER
Press RES 1x -
init decreases 1 step
2X
HIGH
Press briefly
BRAKE pedal
AP900Ci/ GC90Ci quick installation manual
Switch speed limiter
ON (push CM back)
Release BRAKE
pedal.
By every press of CM system responses with number
of beeps corresponding to activated init level
HIGH
Press and hold
Stop safely the
BRAKE pedal
vehicle
Optional
1X
LOW
2X
HIGH
Press and hold the
BRAKE pedal
3X
HIGH
Drive at least 40
km/h
Press SET key 4
(lift CM up 4x)
Press SET key 4
times
(lift CM up 4x)
Press SET key 1
time
(lift CM up)
Press SET 1x -
init increases 1 step
LONG
HIGH
Release BRAKE-
times
setup completed.
ProTeam OÜ
4x
HIGH
HIGHER