Aeon AEON-50310 Manuel - Page 2

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Aeon AEON-50310. Aeon AEON-50310 18 pages. Pull down fireplace tv mount with vertical and horizontal adjustment, vesa 600x400 compatible

Imprimer la page

PLEASE NOTE: IMPROPER INSTALLATION WILL VOID WARRANTY.

• Please do not begin installation until you have thoroughly read and understood these instructions.

• Improper installation may cause serious injury and/or damage.

• It is recommended that a qualified contractor install the AEON-50310 TV Mount. The manufacturer does not

accept responsibility for incorrect installation.

• This wall mount will only support flat panel displays. The maximum load capacity is 100 lbs.

• TV Mount can be mounted onto two wooden studs, with center to center distance between 26"

• If mounting to a wall of wood stud construction,be sure that mounting bolt are anchored the center of the studs,

When installing the TV mount on a concrete wall the wall must be at least

strength from 2500 to 3000 psi (17.2 to 20.7 Mpa),the concrete wall must meet ASTM C39. When installing the TV

mount on a cinder block wall, the cinder blocks must meet ASTM C216 specifications and have a minimum

nominal width of 8". Be sure to mount in a solid part of the block, generally 1" minimum from the side of the

block.Do not drill into mortar joints! If plaster/dry wall is thicker than 0.6",custom fasteners must be supplied

by the installer.

Required Tools

3/16" 3/8"

TV.

2 of 18

8" thick with a minimum compressive

Optional Tools