Aeon AEOTEC GEN5 Manuel de l'utilisateur - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Aeon AEOTEC GEN5. Aeon AEOTEC GEN5 8 pages. Door window sensor

Imprimer la page

23-2-2017

With your Door Window Sensor now working as a part of your smart home, you'll be able to conﬁgure it from your home

control software or phone application. Please refer to your software's user guide for precise instructions on conﬁguring

Door Window Sensor to your needs.

Attach your Sensor to its plates.

With your sensor added to your Z-Wave network, it's now time to insert each main part of your sensor into the

corresponding sensor plate.

1. Insert the larger of your two sensor parts into the large mounting plate ensuring that the dimple on the front is on

the same side as the smaller mounting plate.

2. lnsert the smaller of your two sensor parts into its mounting plate.

Advanced functions.

Wake Up Sensor.

In order to send your Sensor new conﬁguration commands from your Z-Wave controller or gateway, it will need to be

woken up.

1. Remove your Sensor unit from its Back Mounting Plate, press the Action Button on the back of the Sensor unit

and then release the Action Button. This will trigger and send a wake up notiﬁcation command to your

controller/gateway.

2. If you want your Sensor to keep awake for a longer time, press and hold the Action Button on the back of the

Sensor unit for 3 seconds, then your Sensor will wake up for 10 minutes and the Status LED will fast blink while it is

awake.

https://aeotec.freshdesk.com/support/solutions/articles/6000159782-door-window-sensor-gen5-user-guide-

Door Window Sensor Gen5 (User Guide) : Aeotec by Aeon Labs

6/8