Dimplex CLB20 Instructions d'installation et d'utilisation
Parcourez en ligne ou téléchargez le pdf Instructions d'installation et d'utilisation pour {nom_de_la_catégorie} Dimplex CLB20. Dimplex CLB20 2 pages. Brayford log stove; springborne coal stove
Également pour Dimplex CLB20 : Manuel d'instruction (3 pages), Instructions d'installation et d'utilisation (2 pages)
Imprimer la page
Ritz Stove
Club Stove
510
597
Ritz Stove
IMPORTANT : THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
Important Safety Advice:
When using electrical appliances, basic precautions
should be followed to reduce the risk of fire, electric
shock, and injury to persons, including the following :
•
If the appliance is damaged, check immediately
with the supplier before installation and operation.
•
Do
not
use
this
surroundings of a bath, shower or swimming pool.
•
Do not use outdoors.
•
This heater must not be located immediately below
a fixed socket outlet or connection box.
•
Do not cover or obstruct in any way the heat outlet
grille located at the bottom of the heater.
Overheating will result if the heater is accidentally
covered.
•
Ensure
that
furniture,
combustible materials are positioned no closer
than 1 metre from the heater.
•
In the event of a fault unplug the heater.
•
Unplug the heater when not required for long
periods.
•
Keep supply cord away from the front of the
heater.
•
Although
this
standards, we do not recommend its use on deep
pile carpets or on long hair type of rugs.
•
The appliance is not intended for use by young
children or infirm persons without supervision.
•
Young children or infirm persons should be
supervised to ensure that they do not play with the
appliance.
•
The appliance must be positioned so that the plug
is accessible.
•
If the supply cord is damaged it must be replaced
by the manufacturer or service agent or similarly
qualified person in order to avoid a hazard.
(AUS/NZ)
Model: RIT20
Model: CLB20
340
heater
in
the
immediate
curtains
or
heater
complies
with
Installation and Operating Instructions
597
General
General
Unpack the heater carefully and retain the packaging for possible
Unpack the heater carefully and retain the packaging for possible
future use, in the event of moving or returning the fire to your
future use, in the event of moving or returning the fire to your
supplier.
supplier.
This model is designed to be free standing and is normally
This model is designed to be free standing and is normally
positioned against a wall.
positioned against a wall.
A choice of 1kW or 2kW heat output is provided by the fan heater,
A choice of 1kW or 2kW heat output is provided by the fan heater,
which is located at the bottom of the unit.
which is located at the bottom of the unit.
Before connecting the heater check that the supply voltage is the
Before connecting the heater check that the supply voltage is the
same as that stated on the heater.
same as that stated on the heater.
Please note: Used in an environment where background noise
Please note: Used in an environment where background noise
is very low, it may be possible to hear a sound which is related
is very low, it may be possible to hear a sound which is related
to the operation of the flame effect. This is normal and should
to the operation of the flame effect. This is normal and should
not be a cause for concern.
not be a cause for concern.
Electrical
Electrical
WARNING: THIS APPLIANCE MUST BE EARTHED.
WARNING: THIS APPLIANCE MUST BE EARTHED.
This fire is suitable for operation on an AC~ electricity supply having
This fire is suitable for operation on an AC~ electricity supply having
the same voltage as that shown on its rating label.
the same voltage as that shown on its rating label.
other
Before switching on, please read the safety warnings and operating
Before switching on, please read the safety warnings and operating
instructions.
instructions.
safety
510
340
Club Stove
08/19279/1
Issue 1
Fig. 1
Fig. 1