Crux Sightline MRVBM-77Q Manuel - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel pour {nom_de_la_catégorie} Crux Sightline MRVBM-77Q. Crux Sightline MRVBM-77Q 7 pages. Backup camera and video interface for 2017 and up bmw & mini vehicles with evo2 idrive5 systems

Imprimer la page

INTERFACING SOLUTIONS

WIRING AT THE HEADUNIT

1. Remove the headunit and unplug the Quadlock

connector. Unplug the Fiber Optic cable connector

from the main connector housing.

3. Plug the male Quadlock connector of the

MRVBM-77Q power harness to the headunit.

5. Plug the cameras to be used to the corresponding video RCAs on the I/O harness. Use the power and

camera ground wires supplied on the same harness.

6. Test the cameras for functionality. Put the gear in reverse and confirm that the backup camera image shows

up on the screen. Put the gear to drive and the front camera image should show on the screen (confirm

front camera setting on the OSD on page 2).

7. If using the AV input, plug in an AV source to test for functionality. Use the selector buttons as stated on

pages 4 an 5.

8. Once functionality tests are completed, reinstall the headunit.

Crux Interfacing Solutions • 21541 Nordhoff St., Unit C, Chatsworth, CA 91311

Sightline

Multi View Integration

phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com

Backup Camera and Video Interface for

2017 and up BMW & Mini Vehicles with Evo2 iDrive5 Systems

2. Plug in the fiber optic cable connector to the

female Quadlock connector supplied on the

MRVBM-77Q power harness.

4. Plug the OEM Quadlock connector to the mating

connector on the MRVBM-77Q power harness.

6 of 7

MRVBM-77Q

rev.110419