Dimplex XLS12N Manuel d'instructions d'installation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} Dimplex XLS12N. Dimplex XLS12N 8 pages. Ultra-slim storage heaters
Également pour Dimplex XLS12N : Manuel d'utilisation (10 pages), Mode d'emploi (4 pages), Mode d'emploi (4 pages), Manuel d'instructions d'installation (8 pages), Manuel d'instructions d'installation (8 pages)

24. Fit the front bricks with the airways facing inwards.

26. Check that the damper mechanism within the heater

functions freely by rotating the left hand control knob.

Check also that the right hand (input) knob rotates freely.

28. Holding the bottom edge of the front panel towards

you, locate the top edge of the front panel in the groove at

the top of the heater.

25. Re-ﬁ t the inner front panel/insulation assembly,

ensuring the bottom edge of the panel is located behind

the base ﬂ ange. Make sure all screws removed in

Operation 18 are replaced securely.

27. Introduce mains supply cable through the cable clamp

into the terminal area, and connect in accordance with the

terminal markings. HEAT RESISTING CABLE MUST BE

USED (min. T85). Ensure that the cable is clamped so

that there is no excess cable in the terminal area. ON

NO ACCOUNT SHOULD ANY SURPLUS CABLE BE

PUSHED INSIDE OR BEHIND THE HEATER. CHECK

ALL ELECTRICAL CONNECTIONS FOR TIGHTNESS.

29. Push the bottom of the front panel towards the heater,

so that the bottom ﬂ ange locates under the base.