Aeon Labs Aeotec Manuel de l'utilisateur - Page 11
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Aeon Labs Aeotec. Aeon Labs Aeotec 11 pages. Home energy meter
Également pour Aeon Labs Aeotec : Manuel de l'utilisateur (7 pages), Manuel (9 pages)
Imprimer la page
17.09.2018
Your Garage Door Controller will now be reset to its original settings, and the Network LED will be solid for 2 seconds
and then start slow blinking to confirm a success.
Download new ringtones to your Garage Door Controller from PC host.
1. Use the Micro USB cable to connect Garage Door Controller to your PC host. PC host will detect the removable
storage after a few seconds and then you will find it in the section of "Device with Removable Storage".
2. Double click the "Removable Disk (G:)" to open it.
3. Now you can copy/drag the new alarm sounds from the PC hard disk to the Garage Door Controller's flash
memory.
4. Wait a few minutes to complete the copying.
Note: Please do not disconnect the USB port until the copying has completed.
Configure your Garage Door Controller alarm sounds.
You may configure your Garage Door Controller to have different sounds for Opening alarm, Closing Alarm, Unknown
Open Alarm, and Unknown Closing Alarm. To do so, refer to this link:
https://aeotec.freshdesk.com/solution/articles/6000142866-configure-garage-door-controller-alarm-sounds-
(https://aeotec.freshdesk.com/solution/articles/6000142866-configure-garage-door-controller-alarm-sounds-)
Disable your Garage Door Controller alarm.
You can completely disable all your Garage Door Controller alarms if you do not want to have any sounds or strobing
lights. To do you, please follow thjs link here:
https://aeotec.freshdesk.com/solution/articles/6000131922-disable-alarm-sound-in-the-garage-door-controller
(https://aeotec.freshdesk.com/solution/articles/6000131922-disable-alarm-sound-in-the-garage-door-controller)
Other Configurations.
You may want to take full control over your Garage Door Controllers settings, you will be able to find them in the below
link for all supported command classes, and possible parameter configuration settings.
1. Garage Door Controller.
https://aeotec.freshdesk.com/support/solutions/articles/6000053811-garage-door-controller-gen-5-user-guide-
Garage Door Controller Gen5 user guide. : Aeotec by Aeon Labs
(https://aeotec.freshdesk.com/helpdesk/attachments/6052990294)
11/11