Aeon Labs Aeotec MULTISENSOR 6 Manuel de l'utilisateur - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Aeon Labs Aeotec MULTISENSOR 6. Aeon Labs Aeotec MULTISENSOR 6 11 pages.
Également pour Aeon Labs Aeotec MULTISENSOR 6 : Manuel (14 pages)
Imprimer la page
2/26/2018
3. The Back-Mount Arm may be locked at various angles by turning the Friction Lock clockwise and counter-clockwise to respectively
tighten or loosen the angle of the arm. You can rotate the Friction Lock to change the measurement area of sensor.
Advanced Functions.
Your MultiSensor has built in battery level detection. It will automatically report its battery level to the associated controller/gateway
throughout its life until the battery is fully drained and needs replacing. The battery status will often be displayed in the user interface of
the controller/ gateway. When used properly in an optimised Z-Wave network, your MultiSensor can be powered by batteries for 24
months before battery replacement is necessary.
Recommendation: For networks which do not offer a method to display
the battery level of your MultiSensor, it is recommended that the sensor be tested occasionally to ensure that the batteries still hold enough
charge to operate. Batteries naturally lose their charge over time.
Outdoor installation.
Please note that when installed outdoors of your home, your MultiSensor should only be relied on for temperature, light, humidity, and
ultraviolet readings, where as the motion sensing capabilities should be disabled on your gateway in order to avoid false motion
readings. If selecting an outdoor location, it's important to position your MultiSensor in a sheltered location. It is best if your MultiSensor
is not directly exposed to rain, and is important that the humidity venting on your MultiSensor never is.
https://aeotec.freshdesk.com/support/solutions/articles/6000057073-multisensor-6-user-guide-
MultiSensor 6 user guide. : Aeotec by Aeon Labs
7/11