DimSport RapidBike EVO Manuel d'instructions d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'instructions d'installation pour {nom_de_la_catégorie} DimSport RapidBike EVO. DimSport RapidBike EVO 12 pages.

Imprimer la page

1. Installing Instructions
2. Crankshaft Sensor Section
3. O2 Sensor Section
4. Feeding Voltage Section
5. Final Section
6. Accessories Section

___________________________ Installing instructions

_____________________________ T.P.S. section ______________________________

7. Locate and disconnect the black six-way connector placed into the airbox (Fig.1).

Fig.1

8. Connect the green wire of the RAPID BIKE wiring harness to the wire located in

central position on the top row of the stock connector (Pin #4), using the posi-tap

connector (Fig.2).

Fig.2

9. Connect the stock connector in the original position.

Issued by: PM

approved by DG

______________________________

Rev.07

date 01/03/16

pag. 3/12