DimSport YOUTUNE Manuel d'installation et d'utilisation - Page 6

Parcourez en ligne ou téléchargez le pdf Manuel d'installation et d'utilisation pour {nom_de_la_catégorie} DimSport YOUTUNE. DimSport YOUTUNE 10 pages. Controller for rapid bike evo and rapid bike racing modules

Imprimer la page
AFR => My Tuning Bike installed => displays/modifies AFR
target.
QS => kill time adjustment
Digital indication of
the actual gear ratio
This parameter modifies the kill time of engine's power.
In case of gear-based kill time, this parameter affects each
single value sets in the software
PUSH
)
(MODE
Issued by: PM
approved by DG
Display shows the AFR measured by the My Tuning Bike's
wideband O2 sensor, LEDs indicate AFR's trend
AFR target can be modified only
with My Tuning Bike connected
Adjustments range: ±10 (1 = 0,1 AFR)
LEDs indicate the actual
gear ratio: 4 LEDs on the
left → Neutral
"Cut-off" adjustment over the
software's setting (±20ms)
Pressing again button (-)
after -19 will display
"OFF": quick shifter
feature is disabled
Rev.01
Feature available for
both Rapid Bike Evo
and Racing modules
th
Starting for the 5
st
th
from 1
to 6
are indicated
date 03/09/18
LED, gears
pag. 6/10