Pioneer AppRadio SPH-DA01 Mises à jour des microprogrammes

Parcourez en ligne ou téléchargez le pdf Mises à jour des microprogrammes pour {nom_de_la_catégorie} Pioneer AppRadio SPH-DA01. Pioneer AppRadio SPH-DA01 4 pages. Display unit appradio
Également pour Pioneer AppRadio SPH-DA01 : Manuel d'utilisation (32 pages), Manuel d'utilisation (36 pages), Informations importantes pour l'utilisateur (24 pages), Manuel d'installation (40 pages)

AppRadio SPH-DA01 Firmware Update Version 2.64 (October

2013)

This firmware update applies only to AppRadio SPH-DA01 units sold in the United States and Canada and

provides compatibility with an iPhone 4 or iPhone 4S running iOS 7.

In order to perform this update, the following items are needed:

•

Pioneer SPH-DA01 AppRadio Receiver

•

microSD card

IMPORTANT

Please download and print these AppRadio Firmware Update instructions before downloading and installing

the firmware update. It is very important that you complete all steps correctly and in the order described below.

WARNING! This firmware update applies only to AppRadio (SPH-DA01) units sold in the United States

and Canada that have previously been updated to firmware v2.63.

DO NOT perform this firmware update if your AppRadio SPH-DA01 does not already have the firmware

update v2.63, released in July 2012, installed.

How to determine if the v2.63 firmware update has already been installed:

1. From the AppRadio main screen, press the settings 'gear' icon in the upper left hand corner, and then select

the General settings icon.

2. Press the Radio icon at the bottom of the General Settings screen.

•

If the Software Version shows v2.63, the update has already been installed. You can proceed with the

v2.64 firmware update as outlined in the steps below.

•

If the Radio settings screen shows a software version of 2.56 or lower, the v2.63 update must be

installed first. The v2.63 firmware update and instructions can be found

here:

http://www.pioneerelectronics.com/PUSA/Car/AppRadio/AppRadio+(SPH-DA01)+Firmwar

e+Update+v2.63+(July+2012)

Note: If you have any difficulty carrying out these instructions or wish to have this update performed

by Pioneer, please contact Pioneer Customer Service toll free at (800) 421-1404 during regular

business hours (M-F 10:30AM - 7:00PM Eastern Time, excluding holidays) for assistance.

A. Downloading the firmware update file

1. Download the firmware update by

http://www.pioneerelectronics.com/PUSA/Support/Do

clicking:

Once you have downloaded the .ZIP file to your computer, locate the file on your computer and double click the

file to decompress it. If you do not have a decompression utility installed on your computer, you can download

WinZip at

http://www.winzip.com

2. Once the .ZIP file is decompressed, locate and copy the "CE66" folder onto a blank microSD card.

*Note: Ensure that the "CE66" folder is located within the root (top) layer of the microSD card. There should be

(purchase may be required).

wnloads

Page 1 of 4