Pioneer AVH-A7100BT/XNRU Instructions pour la mise à jour du micrologiciel
Parcourez en ligne ou téléchargez le pdf Instructions pour la mise à jour du micrologiciel pour {nom_de_la_catégorie} Pioneer AVH-A7100BT/XNRU. Pioneer AVH-A7100BT/XNRU 3 pages.
Imprimer la page
Firmware Update Instructions for AVH-A7100BT/XNRU (Russia)
REMARKS:
Make sure to download the correct firmware file for your region, the European
version (EU5 model) and Russian version (UR model) use a different update file
Do NOT install a firmware file which is intended for a different region.
If you have any difficulty carrying out these instructions, please contact Pioneer Customer
Support. Once upgraded to this version, it is not possible to downgrade to a lower version.
This firmware is NOT intended for US version products.
Please download and print these instructions before downloading and installing the
firmware update. It is important that you complete all steps correctly and in the order
described below.
DO NOT turn your unit off or disconnect the USB storage device while the firmware is being
updated.
You can only update the firmware when the vehicle is stopped and the parking brake is
engaged.
In order to perform this update, the following items are needed:
Pioneer In-Dash AV Receiver listed above
A USB storage device meeting the following requirements:
-
2 GB or larger in capacity, formatted to FAT32
-
Blank (should not contain any files)
A. Displaying the firmware version
Check whether the firmware of your unit needs to be updated by checking the version number of
the firmware.
1. Press the HOME button to display the Top menu screen.
2. Touch the following keys in the following order.
The "System" screen appears
3. Scroll down the list and touch [System Information], next touch [Firmware Information].
4. After the "Firmware Information" screen appears, check the firmware version number.
5. If the firmware version is 8.04 or higher, it is not necessary to update the firmware. If the
version number is lower than 8.04, it is necessary to update the firmware. Please continue
to Step B.