Pioneer AVH-P5750DVD Manuel d'installation - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Pioneer AVH-P5750DVD. Pioneer AVH-P5750DVD 8 pages. Avh-p5750dvd
Également pour Pioneer AVH-P5750DVD : Manuel d'installation (44 pages)

Pioneer AVH-P5750DVD Manuel d'installation
Connecting the Units
When connecting with a rear view camera
When using this product with a rear view camera, automatic switching to video from a rear
view camera when the gear shift is moved to REVERSE (R) position is possible.
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY
RESULT IN INJURY OR DAMAGE.
CAUTION
• The screen image may appear reversed.
• The rear view camera function is to use this product as an aid to keep an eye on trailers, or backing into a tight
parking spot. Do not use this function for entertainment purposes.
• The object in rear view may appear closer or more distant than in reality.
CAUTION
You must use a camera
This unit
20 cm
which outputs mirror
RCA cable
reversed images.
Rear view camera in
(sold separately)
rear view camera
To video output
Extension lead (supplied)
15 cm
8 m
V
Violet/white
Violet/white
Fuse resistor
Of the two lead wires connected to the back
lamp, connect the one in which the voltage
changes when the gear shift is in the REVERSE
(R) position. This connection enables the unit to
sense whether the car is moving forwards or
backwards.
Connection method
1.
Clamp the lead.
2. Clamp firmly
f
firmly
needle-nosed
pliers.
Note:
• It is necessary to set B-CAM to ON in SET UP
when connecting the rear view camera.
When connecting with a multi-channel processor
AV-BUS input (Blue)
40 cm
IP-BUS input (Blue)
Blue
15 cm
Blue
This product
IP-BUS cable (supplied with
23 cm
multi-channel processor)
Subwoofer output or non fading output
(SUBWOOFER OUTPUT o
r
NON-FADING
F
FADING
OUTPUT)
RCA cable (supplied with
multi-channel processor)
Optical cable (supplied with
multi-channel processor)
Blue
Multi-channel processor
DVD Player
(DEQ-P7650)
(e.g. XDV-P9— or
(sold separately)
SDV-P7)
(sold separately)
Black
Blue
IP-BUS cable
Black
Blue
IP-BUS cable
(supplied with
TV tuner)
Hide-away TV tuner
with
(e.g. GEX-P5750TVP)
(sold separately)
AV-BU cable (supplied
S
Black
with TV tuner)
Fig. 4
When connecting with Vehicle Dynamics Processor and an iPod adapter
Video input
RCA cable
(
supplied with
DVD player)
This unit
15 cm
IP-BUS input (Blue)
IP-BUS cable
(Supplied with
Black
the iPod adapter)
Optical cable connection
box (supplied)
iPod, iPod mini or iPod Photo
Optical cable
(sold separately)
Dock connector port
To video output
(FRONT VIDEO
OUTPUT)
Dock connector
(Supplied with the iPod adapter)
IP-BUS
Blue
output
(Black)
Multi-CD Player
(sold separately)
When you connect a separately sold
DVD player to the separetely sold
multi-channel processor, the optical
cable from DVD player must be
connected to the optical cable 2 input
(OPT. IN2) of the multi-channel
processor.
Fig. 5
Connecting and installing the
optical cable connection box
WARNING
• Avoid installing this unit in such a location where
the operation of safety devices such as airbags is
26 pin cable input
prevented by this unit. Otherwise, there is a danger
of a fatal accident.
• Avoid installing this unit in such a location where
the operation of the brake may be prevented.
Yellow
Otherwise, it may result in a traffic accident.
Vehicle Dynamics Processor
• Fix this unit securely with the velcro tape or lock
(e.g. AVG-VDP1)
tie. If this unit is loose, it disturbs driving stability,
(sold separately)
26 pin cable
which may result in a traffic accident.
(supplied with Vehicle
CAUTION
Dynamics Processor)
• Install this unit using only the parts supplied with
this unit. If other parts are used, this unit may be
IP-BUS cable
damaged or could dismount itself, which leads to
an accident or trouble.
1.5 m
Black
Blue
• Do not install this unit near the doors where rain-
water is likely to be spilled on the unit. Incursion
of water into the unit may cause smoke or fire.
iPod adapter
Connecting the optical cable
(e.g. CD-IB100)
1. Connect the optical cable and
ground lead to the main unit.
(Fig. 7)
Connect the optical cable so that it does
Multi-CD player
(sold separately)
not protrude from the unit, as shown in
the illustration. Fasten the ground lead
to the protrusion on the back of the
1.5 m
unit.
2. Connect the optical cable to the
optical cable connection box.
(Fig. 8)
Fig. 6
<ENGLISH>
Optical cable
Fig. 8
Installing the optical cable
connection box
• When installing the optical cable
connection box with the velcro
tape. (Fig. 9)
Install the optical cable connection box
using the velcro tape in the ample
space of the console box.
Velcro tape (hard)
Velcro tape (soft)
Fig. 9
• When installing the optical cable
connection box with the lock tie.
(Fig. 10)
Screw
Wrap the optical cable and connection
box with the protection tape and fasten
with the power code using the lock tie.
Wrap with the protection tape
Fig. 7
Fasten with the lock tie
Fig. 10