Pioneer AVIC-D2 Manuel du matériel - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel du matériel pour {nom_de_la_catégorie} Pioneer AVIC-D2. Pioneer AVIC-D2 27 pages. Double-din dvd navigation system
Également pour Pioneer AVIC-D2 : Manuel du propriétaire (34 pages), Manuel de démarrage rapide (2 pages), Manuel d'entretien (23 pages)
Imprimer la page
Inserting the DVD Map Disc
1
Press and hold the OPEN/CLOSE button.
The LCD panel fully opens, and the DVD-ROM
loading slot appears.
DVD-ROM loading slot
DVD-ROM EJECT button
❒ To close the LCD panel, press the OPEN/
CLOSE button again.
2
Insert the DVD Map Disc into the DVD-
ROM loading slot.
If you insert the DVD Map Disc, the LCD panel
closes automatically, and then format reading
will start.
❒ Make sure the DVD-ROM loading slot is
empty before inserting a DVD Map Disc.
❒ Inserting the DVD Map Disc reboot DVD
navigation mode.
❒ Do not insert anything other than a disc
into the DVD-ROM loading slot.
❒ If you cannot insert a disc completely or if
a inserted disc is not recognized, check
that the label side of the disc is up. Press
the DVD-ROM EJECT button to eject the
disc, and check the disc for damage before
inserting the disc again.
Ejecting the DVD Map Disc
1
Press and hold the OPEN/CLOSE button.
The LCD panel fully opens.
2
Press the DVD-ROM EJECT button.
The DVD Map Disc is ejected.
3
Press the OPEN/CLOSE button.
The LCD panel closes.
Adjusting the LCD Panel Angle
• Do not open and close the LCD panel with
hands by force. This may cause malfunc-
tion.
• When opening, closing and adjusting the
angle of the LCD panel, be careful not to
get your finger caught.
The LCD panel will be closed automatically with
the turning of the ignition switch.
• Press the ANGLE button to adjust the
LCD panel to an easily viewable angle.
You can adjust the angle of the LCD panel
every time you press the ANGLE button.
The LCD panel angle continues changing as
long as you press the ANGLE button and
hold.
❒ When you press the ANGLE button with
the maximum angle, the LCD panel closes
all the way.
❒ The adjusted angle of the LCD panel will be
memorized and the LCD panel will auto-
matically return to this angle the next time
the turning of the ignition switch (ACC) on.
15