Pioneer AVIC-HD3 Manuel du matériel - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel du matériel pour {nom_de_la_catégorie} Pioneer AVIC-HD3. Pioneer AVIC-HD3 22 pages. Dvd av navigation head-unit
Également pour Pioneer AVIC-HD3 : Manuel du matériel (22 pages), Manuel de démarrage rapide (2 pages)

Imprimer la page

• When the LCD panel is subjected to direct sun-

light for a long period of time, it will become

very hot, resulting in possible damage to the

LCD screen. When not using this navigation

system, avoid exposing it to direct sunlight as

much as possible.

• The LCD panel should be used within the tem-

perature ranges shown below.

— Operating temperature range: –10 °C to

+50 °C

— Storage temperature range: –20 °C to +80 °C

• Do not use the LCD panel at temperatures

higher or lower than the operating temperature

range because the LCD panel may not operate

normally and the LCD panel can be damaged.

• The LCD screen is exposed in order to increase

its visibility within the vehicle. Please do not

press strongly on it as this may damage it.

• Do not place anything on the LCD panel when

it is opened. Also, do not attempt to manually

adjust the angle or open/close the LCD panel.

Applying strong force to the LCD panel may

damage it.

• Do not push the LCD screen with a large

amount of force as this may scratch it.

• Never touch the LCD screen with anything

besides your finger when operating the Touch

Panel functions. The LCD screen can scratch

easily. (The stylus is supplied for special cali-

brations. Do not use the stylus for normal oper-

ation.)

• Be careful not to place anything between the

LCD panel and the main body when the LCD

panel is closing. If an object gets between the

LCD panel and main body, the LCD panel may

stop working.

About the liquid crystal display

(LCD) screen

• If the LCD panel is near the vent of an air con-

ditioner when it is opened, make sure that air

from the air conditioner is not directly blowing

on the panel. Heat from the heater may break

the LCD screen, and cool air from the air con-

ditioner may cause moisture to form inside the

product, resulting in possible damage. Also, if

the LCD panel is cooled down by the air condi-

tioner, the LCD screen may become dark, or

the life span of the small fluorescent tube used

inside the LCD panel may be shortened.

• Small black dots or white dots (bright dots)

may appear on the LCD screen. These are due

to the characteristics of the LCD screen and do

not indicate a problem with the navigation sys-

tem.

• At low temperatures, the LCD screen may be

dark for a while after the power is turned on.

• The LCD screen will be difficult to see if it is

exposed to direct sunlight.

• When using a mobile phone, keep the aerial of

the mobile phone away from the navigation

system to prevent video disruption with distur-

bances such as spots or coloured stripes.

Keeping the LCD screen in good

condition

• When removing dust from the LCD screen or

cleaning the LCD screen, first turn the system

power off, then wipe with the soft dry cloth.

• When wiping the LCD screen, take care not to

scratch the surface. Do not use harsh or abra-

sive chemical cleaners.

About the small fluorescent tube

• A small fluorescent tube is used inside the dis-

play to illuminate the LCD screen.

— The fluorescent tube should last for approx-

imately 10 000 hours, depending on operat-

ing conditions. (Using the navigation

system at low temperatures reduces the

service life of the fluorescent tube.)

— When the fluorescent tube reaches the end

of its useful life, the LCD screen will be dark

and the image will no longer be projected. If

this happens, consult your dealer or the

nearest authorised Pioneer Service Station.