Din Sync VCF303 Manuel de l'utilisateur - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Din Sync VCF303. Din Sync VCF303 14 pages. Eurorack filter module

Imprimer la page

Input and Output Sections

Connect the signal to be filtered to the INPUT jack. This

works best with standard eurorack oscillators but will

also work on any normal audio signal.

The OVERDRIVE knob overdrives the filter input. The

initial 40%-50% of its turn may be subtle depending on

the level of the signal connected to the INPUT jack.

Once the overdrive starts to bite, the resonance is

suppressed and the overall tone will have a more

compressed sound.

TIP: a small amount of overdrive will lower the volume

decrease associated with increased resonance levels on

the TB-303

The VOLUME knob controls the overall output.

The VCF303 has a fixed output level and this knob is

simply an attenuator.

NOTE: With a strong signal at the filter input, and with

OVERDRIVE/VOLUME at maximum the VCF303 is

capable of very high levels (up to around 20v peak to

peak)

Be sure to lower the volume level in these cases to

avoid clipping to anything in the signal chain after

the VCF303.

The OUTPUT jack carries the filtered signal, connect this

to a vca or mixer.