Pioneer DEH-141UB: DEH-140UB Manuel du propriétaire - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Pioneer DEH-141UB: DEH-140UB. Pioneer DEH-141UB: DEH-140UB 16 pages. Cd rds receiver
Également pour Pioneer DEH-141UB: DEH-140UB : Manuel d'entretien (13 pages)
Imprimer la page
Operating this unit
Head unit
12 3 4
5
6
7
8
9
a
b
c de
Part
Part
1
h (eject)
8
(back)
2
(list)
9
c/d
MULTI-CONTROL
3
a
BAND
(M.C.)
4
b
SRC/OFF
1/
to 6/
5
c
Disc loading slot
(clock)
AUX input jack
6
d
USB port
(3.5 mm stereo
jack)
7
(EQ)
e
Detach button
CAUTION
! Use an optional Pioneer USB cable (CD-
U50E) to connect the USB audio player/USB
memory as any device connected directly to
the unit will protrude out from the unit and
may be dangerous.
! Do not use unauthorized products.
Display indication
1
3
5
7
8
2
4
6
Indicator
State
! Tuner: band and fre-
quency
! RDS: program service
name, PTY information
Main dis-
1
and other literal informa-
play section
tion
! Built-in CD player and
USB: elapsed playback
time and text information
The list function is being oper-
2
(list)
ated.
3
LOC
Local seek tuning is on.
4
(TA)
TA function is on.
5
(TP)
A TP station is tuned in.
6
(repeat)
Track or folder repeat is on.
(ran-
7
Random play is on.
dom)
The sound retriever function
8
(sound re-
is on.
triever)
Set up menu
When you turn the ignition switch to ON after in-
stallation, set up menu appears on the display.
You can set up the menu options below.
Autogood products «130»
Operating this unit
1
After installation of this unit, turn the
ignition switch to ON.
SET UP appears.
2
Turn M.C. to switch to YES.
# If you do not operate for 30 seconds, the set up
menu will not be displayed.
# If you prefer not to set up at this time, turn M.C.
to switch to NO.
If you select NO, you cannot set up in the set up
menu.
3
Press M.C. to select.
4
Perform the following procedures to set
the menu.
To proceed to the next menu option, you need to
confirm your selection.
CLOCK SET (setting the clock)
1 Turn M.C. to adjust hour.
2 Press M.C. to select minute.
3 Turn M.C. to adjust minute.
4 Press M.C. to confirm the selection.
FM STEP (FM tuning step)
Normally, the FM tuning step employed by seek
tuning is 50 kHz. When AF or TA is on, the tuning
step automatically changes to 100 kHz. It may be
preferable to set the tuning step to 50 kHz when
AF is on.
! The tuning step remains at 50 kHz during man-
ual tuning.
1 Turn M.C. to select the FM tuning step.
50 (50 kHz)—100 (100 kHz)
2 Press M.C. to confirm the selection.
DEMO (demo display setting)
1 Turn M.C. to set the demo display to on or off.
2 Press M.C. to confirm the selection.
TITLE (multi-language)
This unit can display the text information of a com-
pressed audio file even if they are embedded in a
Western European or Russian language.
! If the embedded language and the selected
language setting are not the same, text infor-
mation may not display properly.
! Some characters may not be displayed prop-
erly.
1 Turn M.C. to select the desired setting.
EUR (European)—RUS (Russian)
2 Press M.C. to confirm the selection.
QUIT appears.
5
To finish your settings, turn M.C. to select
YES.
# If you prefer to change your setting again, turn
M.C. to switch to NO.
6
Press M.C. to select.
Notes
! You can set up the menu options in the initial
settings. For details about the settings, refer
to Initial settings on page 6.
! You can cancel set up menu by pressing
SRC/OFF.
Basic operations
Important
! Handle gently when removing or attaching
the front panel.
! Avoid subjecting the front panel to excessive
shock.
! Keep the front panel out of direct sunlight
and high temperatures.
! To avoid damaging the device or vehicle inte-
rior, remove any cables and devices attached
to the front panel before detaching it.
Section
02
3
En