Pioneer DEH-5250SD Manuel d'utilisation - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer DEH-5250SD. Pioneer DEH-5250SD 25 pages. Cd receiver
Également pour Pioneer DEH-5250SD : Manuel d'installation (8 pages)

Imprimer la page

1. Specifications

Section

Operating this unit

Note

When selecting FM as the source, you cannot

switch to SLA.

Initial Settings

1 Function display

! Shows the function status.

Press SRC/OFF and hold until the unit

turns off.

Press M.C. and hold until the initial set-

ting menu appears in the display.

Turn M.C. to select the initial setting.

After selecting, perform the following proce-

dures to set the initial setting.

Language select (multi language)

For your convenience, this unit equips multiple lan-

guage display. You can select the language best sui-

ted to your first language.

1 Press M.C. to select the language.

English Español Português

Calendar (setting the date)

1 Push M.C. left or right to select the segment of

the calendar display you wish to set.

Year Day Month

2 Push M.C. up or down to set the date.

Clock (setting the clock)

1 Push M.C. left or right to select the segment of

the clock display you wish to set.

Hour Minute

2 Push M.C. up or down to put a clock right.

! You can match the clock to a time signal by press-

ing M.C.

! If 00 to 29, the minutes are rounded down.

(e.g., 10:18 becomes 10:00.)

! If 30 to 59, the minutes are rounded up. (e.g.,

10:36 becomes 11:00.)

EngineTime alert (elapsed time display setting)

This setting allows you to measure the length of time

that elapses from when the machine is turned on and

display the amount of elapsed time per set period.

Also, you will hear alarm.

1 Press M.C. to select your favorite setting.

OFF 15Minutes 30Minutes

FM step (FM tuning step)

The FM tuning step employed by seek tuning can be

switched between 100 kHz, the preset step, and 50

kHz.

If seek tuning is performed in 50 kHz steps, stations

may be tuned in imprecisely. Tune in the stations with

manual tuning or use seek tuning again.

1 Press M.C. to select the FM tuning step.

50kHz (50 kHz) 100kHz (100 kHz)

AM STEP (AM tuning step)

The AM tuning step can be switched between 9 kHz,

the preset step, and 10 kHz. When using the tuner in

North, Central or South America, reset the tuning

step from 9 kHz (531 kHz to 1 602 kHz allowable) to 10

kHz (530 kHz to 1 640 kHz allowable).

1 Press M.C. to select the AM tuning step.

10 KHZ (10 kHz) 9 KHZ (9 kHz)

USB plug&play (plug and play)

This setting allows you to switch your source to USB/

iPod automatically.

1 Press M.C. to turn the plug and play on or off.

! ON When USB storage device/iPod is con-

nected, the source is automatically switched

to USB/iPod. If you disconnect your USB sto-

rage device/iPod, this unit s source is turned

off.

! OFF When USB storage device/iPod is con-

nected, the source is not switched to USB/

iPod automatically. Please change the source

to USB/iPod manually.

Warning tone (warning tone setting)

If the front panel is not detached from the head unit

within four seconds of turning off the ignition, a warn-

ing tone sounds. You can turn off the warning tone.

1 Press M.C. to turn the warning tone on or off.

AUX (auxiliary input)

Activate this setting when using auxiliary device con-

nected to this unit.

1 Press M.C. to turn auxiliary setting on or off.

Dimmer (dimmer setting)