Pioneer DEH-8400BT Manuel d'utilisation - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer DEH-8400BT. Pioneer DEH-8400BT 37 pages. Cd rds receiver
Également pour Pioneer DEH-8400BT : Manuel de démarrage rapide (8 pages), Manuel d'installation (37 pages)

Imprimer la page

Section

Operating this unit

Press and hold

nection menu.

# You cannot operate this step during a call.

Turn M.C. to select the function.

After selecting, perform the following proce-

dures to set the function.

Device list (connecting or disconnecting a device

from the device list)

! When no device is selected in the device list, this

function is not available.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the name of a device you want

to connect/disconnect.

! Press and hold M.C. to switch the Bluetooth

device address and device name.

3 Press M.C. to connect/disconnect the selected de-

vice.

Once the connection is established, Connected

is displayed.

Delete device (deleting a device from the device list)

! When no device is selected in the device list, this

function is not available.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the name of a device you want

to delete.

! Press and hold M.C. to switch the Bluetooth

device address and device name.

3 Press M.C. to display Delete YES.

4 Press M.C. to delete a device information from

the device list.

! While this function is in use, do not turn off the

engine.

Add device (connecting a new device)

to display the con-

Autogood products «130»

1 Press M.C. to start searching.

! To cancel, press M.C. while searching.

! If this unit fails to find any available cellular

phones, Not found is displayed.

2 Turn M.C. to select a device from the device list.

! Press and hold M.C. to switch the Bluetooth

device address and device name.

3 Press M.C. to connect the selected device.

! To complete the connection, check the device

name (Pioneer BT Unit). Enter the PIN code

on your device if necessary.

! PIN code is set to 0000 as the default. You

can change this code.

! 6-digit number appears on the display of this

unit. Once the connection is established, this

number disappears.

! If you are unable to complete the connection

using this unit, use the device to connect to

the unit.

! If three devices are already paired, Device Full

is displayed and it is not possible to perform

this operation. In this case, delete a paired de-

vice first.

Special device (setting a special device)

Bluetooth devices that are difficult to establish a con-

nection with are called special devices. If your

Bluetooth device is listed as a special device, select

the appropriate one.

1 Press M.C. to display the setting mode.

! If three devices are already paired, Device Full

is displayed and it is not possible to perform

this operation. In this case, delete a paired de-

vice first.

2 Turn M.C. to display a special device. Press to se-

lect.

3 Turn M.C. to display this unit's device name,

Bluetooth device address and PIN code.

4 Use a device to connect to this unit.

! To complete the connection, check the device

name (Pioneer BT Unit) and enter the PIN

code on your device.

! PIN code is set to 0000 as the default. You

can change this code.

Auto connect (connecting to a Bluetooth device

automatically)

1 Press M.C. to turn automatic connection on or

off.

Visibility (setting the visibility of this unit)