Pioneer DEH-8400BT Manuel d'utilisation - Page 8

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer DEH-8400BT. Pioneer DEH-8400BT 37 pages. Cd rds receiver
Également pour Pioneer DEH-8400BT : Manuel de démarrage rapide (8 pages), Manuel d'installation (37 pages)

Pioneer DEH-8400BT Manuel d'utilisation
Operating this unit
Removing the front panel to protect your unit from
theft
The front panel can be detached to deter theft.
1 Press the open button to open the front panel.
2 Grip the left side of the front panel and pull it
gently outward.
Take care not to grip it too tightly or to drop the
front panel and protect it from contact with water
or other fluids to prevent permanent damage.
3 Always keep the detached front panel in a protec-
tion device such as a protection case.
Re-attaching the front panel
1 Reattach the front panel by holding it upright to
the unit and clipping it securely into the mount-
ing hooks.
Turning the unit on
1 Press SRC/OFF to turn the unit on.
Turning the unit off
1 Press and hold SRC/OFF until the unit turns off.
Selecting a source
1 Press SRC/OFF to cycle between:
TUNER (tuner)—CD (CD player)—USB1 (USB1)/
iPod1 (iPod1)—USB2 (USB2)/iPod2 (iPod2)—SD
(SD memory card)—AUX (AUX)—BT Audio (BT
audio)
Adjusting the volume
1 Turn M.C. to adjust the volume.
CAUTION
For safety reasons, park your vehicle when remov-
ing the front panel.
Notes
! When this unit's blue/white lead is connected
to the vehicle's auto-antenna relay control
terminal, the vehicle's antenna extends when
this unit's source is turned on. To retract the
antenna, turn the source off.
! When there are two USB storage devices con-
nected to this unit and you want to switch be-
tween them for playback , disconnect
communications for the USB storage device
first before proceeding.
! If connecting both USB1 (USB storage de-
vice1)/iPod1 (iPod connected using USB
input1) and USB2 (USB storage device2)/
iPod2 (iPod connected using USB input2) at
the same time, use a Pioneer USB cable (CD-
U50E) in addition to the regular Pioneer USB
cable.
Menu operations identical
for function settings/audio
adjustments/initial
settings/lists
Returning to the previous display
Returning to the previous list/category. (the folder/ca-
tegory one level higher.)
1 Press
Turning the demo display on or off
1 Press and hold
Returning to the ordinary display
Canceling the initial setting menu
1 Press BAND/ .
Returning to the ordinary display from the list/cate-
gory
1 Press BAND/ .
Selecting a function or list
1 Turn M.C. or LEVER.
! In this manual, "Turn M.C." is used to describe
the operation used to select a function or list.

Tuner

Basic operations
1
8 9
Autogood products «130»
/DISP.
/DISP.
5
2
3
4
a
Section
02
6
7
RDS
7
En