Pioneer DEH-P520 Manuel d'installation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Pioneer DEH-P520. Pioneer DEH-P520 40 pages.

ALARM OUTPUT (Brown)

The brown lead provides a +12 V constant or pulsed output while alarm is sounding. This

lead has a maximum current capability of 500 mA and can be used to trigger a relay to

sound a siren, horn or flash lights.

30 amp relay (sold separately) required to operate siren, horn or lights.

• Connect Brown wire to one side of relay coil.

• Connect ground to other side of coil.

For sirens, horns or lights requiring +12 V trigger

• Connect normally open pin to fused, constant +12 V source.

For horns or lights requiring ground trigger

• Connect normally open pin to ground.

RELAY

(Sold separately)

30 A Fuse

(Sold separately)

BATT

≠

Car battery

Blue/brown (refer to "STARTER CUT-OFF".)

White/orange (refer to "DOOR LOCK".)

White/red (refer to "ALARM SENSOR".)

Brown

White/yellow (refer to "DOOR SWITCH".)

CONTROL

30 A

OUTPUT

GND

This Product

Horn/Siren, etc.

Fig. 6