Pioneer MVH-X360BT Manuel du propriétaire - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Pioneer MVH-X360BT. Pioneer MVH-X360BT 26 pages.
Également pour Pioneer MVH-X360BT : Manuel d'entretien (46 pages)

Imprimer la page

Pioneer MVH-X360BT Manuel du propriétaire

Using this unit

! Batteries (battery pack or batteries installed)

must not be exposed to excessive heat such

as sunshine, fire or the like.

CAUTION

! Remove the battery if the remote control is

not used for a month or longer.

! There is a danger of explosion if the battery is

incorrectly replaced. Replace only with the

same or equivalent type.

! Do not handle the battery with metallic tools.

! Do not store the battery with metallic ob-

jects.

! If the battery leaks, wipe the remote control

completely clean and install a new battery.

! When disposing of used batteries, comply

with governmental regulations or environ-

mental public institutions' rules that apply in

your country/area.

! "Perchlorate Material – special handling may

apply.

See www.dtsc.ca.gov/hazardouswaste/

perchlorate. (Applicable to California,

U.S.A.)"

Important

! Do not store the remote control in high tem-

peratures or direct sunlight.

! The remote control may not function properly

in direct sunlight.

! Do not let the remote control fall onto the

floor, where it may become jammed under

the brake or accelerator pedal.

Frequently used menu

operations

Returning to the previous display

Returning to the previous list (the folder one level

higher)

1 Press

/DIMMER.

Returning to the ordinary display

Canceling the main menu

1 Press BAND/ .

Returning to the ordinary display from the list

1 Press BAND/ .

Radio

Basic operations

Selecting a band

1 Press BAND/

until the desired band (FM1,

FM2, FM3 for FM or AM) is displayed.

Switching preset stations

1 Press c or d.

! Select PCH (preset channel) under SEEK to

use this function.

! Use the a and b on the remote control to

switch between preset stations.

Manual tuning (step by step)

1 Press c or d.

! Select MAN (manual tuning) under SEEK to

use this function.

Seeking

1 Press and hold c or d, and then release.

You can cancel seek tuning by briefly pressing

c or d.

While pressing and holding c or d, you can

skip stations. Seek tuning starts as soon as

you release c or d.

Using this unit

Note

For details about SEEK, refer to SEEK (left/right

key setting) on page 5.

Storing and recalling stations

for each band

Using preset tuning buttons

To store: Press and hold down one of the

preset tuning buttons (1/

to 6/

) until

the number stops flashing.

To recall: Press one of the preset tuning

buttons (1/

to 6/

Switching the display

Selecting the desired text information

1 Press DISP to cycle between the following:

! FREQUENCY (program service name or

frequency)

! BRDCST INFO (song title/artist name)

! CLOCK (source name and clock)

Notes

! If the program service name cannot be ac-

quired in FREQUENCY, the broadcast fre-

quency is displayed instead. If the program

service name is detected, the program serv-

ice name will be displayed.

! Depending on the band, text information can

be changed.

! Text information items that can be changed

depend on the area.

Function settings

Press M.C. to display the main menu.

Turn M.C. to change the menu option

and press to select FUNCTION.

Black plate (5,1)

Turn M.C. to select the function.

Once selected, the following functions can be

adjusted.

BSM (best stations memory)

BSM (best stations memory) automatically stores

the six strongest stations in the order of their sig-

nal strength.

1 Press M.C. to turn BSM on.

To cancel, press M.C. again.

LOCAL (local seek tuning)

Local seek tuning allows you to tune in to only

those radio stations with sufficiently strong sig-

nals for good reception.

1 Press M.C. to select the desired setting.

FM: OFF—LV1—LV2—LV3—LV4

AM: OFF—LV1—LV2

The highest level setting allows reception of

only the strongest stations, while lower levels

allow the reception of weaker stations.

SEEK (left/right key setting)

You can assign a function to the left and right keys

of the unit.

Select MAN (manual tuning) to tune up or down

manually or select PCH (preset channel) to switch

between preset channels.

1 Press M.C. to select MAN or PCH.

USB storage device

MTP connection

MTP-compatible Android devices (running

Android OS 4.0 or higher) can be connected by

MTP connection using the USB source. To con-

nect an Android device, use the cable that came

with the device.

Notes

! This function is not compatible with MIX-

TRAX.

<QRD3221-B>5

Section