Pioneer MXT-X176UI Manuel du propriétaire - Page 3

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Pioneer MXT-X176UI. Pioneer MXT-X176UI 24 pages.

Pioneer MXT-X176UI Manuel du propriétaire

Before You Start

Thank you for purchasing this PIONEER product
To ensure proper use, please read through this manual before using this product. It is especially
important that you read and observe WARNINGs and CAUTIONs in this manual. Please keep the
manual in a safe and accessible place for future reference.
WARNING
• Do not attempt to install or service this product by yourself. Installation or servicing of this
product by persons without training and experience in electronic equipment and automotive
accessories may be dangerous and could expose you to the risk of electric shock, injury or other
hazards.
• Do not attempt to operate the unit while driving. Make sure to pull off the road and park your vehicle
in a safe location before attempting to use the controls on the device.
CAUTION
• Do not allow this unit to come into contact with moisture and/or liquids. Electrical shock could result.
Also, damage to this unit, smoke, and overheating could result from contact with liquids.
• Always keep the volume low enough to hear outside sounds.
CAUTION
1 Do not touch the speaker flexible wire
.
2 Do not change the direction of the speaker terminal assembly
3 Make sure lead and speaker terminals do not contact metal.
4 When making connections, refer also to the instruction manual of the car stereo used.
Speaker
If you experience problems
Should this unit fail to work properly, please contact your dealer or nearest authorized PIONEER Service
Station.
Basic operation
MXT-X376BT/X176UI
SRC (source)/OFF
.
*1 The button indications vary depending on the unit.
*2 This button is referred to as DISP in this manual.
Remote Control
* MXT-X176UI has different indications for these buttons.

Getting Started

M.C. (multi-control) dial
*1
BAND/
/DIMMER
/
*
SRC (source)
Display window
Detach button
Display button/
DISP OFF*2
VOLUME +/–
MUTE
*
DISP (display)
En
3