Pioneer SPH-10BT Manuel d'utilisation - Page 11

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer SPH-10BT. Pioneer SPH-10BT 35 pages. Smartphone receiver
Également pour Pioneer SPH-10BT : Manuel d'installation (33 pages), Instructions pour la mise à jour du micrologiciel (4 pages), Instructions pour la mise à jour du micrologiciel (6 pages), Instructions pour la mise à jour du micrologiciel du système (7 pages)

Attach the front panel to the unit (page 4).

INITIAL settings

Press and hold

Press

to select [INITIAL], then press

Press

to select an option, then press

Menu Item

FM STEP

[100KHZ], [50KHZ]

SP-P/O

[FUL/SUB]

[SUB/SUB]

[FUL/FUL]

UPDATE

[S/W VER], [START]

until the unit turns off.

to display the main menu.

Description

Select the FM tuning step from 100 kHz or 50 kHz.

Select when there is a full-range speaker connected to the rear

speaker output leads and there is a subwoofer connected to the

RCA output.

Select when there is a passive subwoofer connected directly to

the rear speaker output leads and there is a subwoofer

connected to the RCA output.

Select when there are full-range speakers connected to the rear

speaker output leads and RCA output. If there is a full-range

speaker connected to the rear speaker output leads, and the

RCA output is not used, you may select either [FUL/SUB] or [FUL/

FUL].

Select [S/W VER] to confirm the latest system information on the

unit.

Select [START] to update the unit to the latest software and

initialize the unit settings. For details on the latest software and

updating, visit our website.

- 11 -

to confirm.