Pioneer Super Tuner IIID DEH-4250SD Manuel d'installation - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Pioneer Super Tuner IIID DEH-4250SD. Pioneer Super Tuner IIID DEH-4250SD 8 pages. Cd receiver
Également pour Pioneer Super Tuner IIID DEH-4250SD : Manuel d'utilisation (23 pages)

Pioneer Super Tuner IIID DEH-4250SD Manuel d'installation
2. Rear output or
1. This product
subwoofer output
6. Antenna jack
3. Front output
5. Fuse (10 A)
4. Wired remote input
Hard-wired remote control
adaptor can be connected
(sold separately).
7. Yellow
Connect to the constant 12 V supply terminal.
8. Red
Connect to terminal controlled by
ignition switch (12 V DC).
9. Black (chassis ground)
Connect to a clean, paint-free metal location.
10. White
12. Gray
14. Front speaker
14. Front speaker
11. White/black
13. Gray/black
15. Left
16. Right
17. Green
19. Violet
21. Rear speaker
21. Rear speaker
18. Green/black
20. Violet/black
22. With a 2 speaker system, do not connect
anything to the speaker leads that are
not connected to speakers.
26. Power amp
(sold separately)
23. To rear output or
subwoofer output
26. Power amp
(sold separately)
24. To front output
25. Connect with RCA cables
(sold separately)
28. System remote control
27. Blue/white
Connect to system control terminal of the
power amp or auto-antenna relay control
terminal (max. 300 mA 12 V DC).
29. Perform these connections
when using the optional
amplifier.
14. Front speaker
14. Front speaker
30. Rear speaker
30. Rear speaker
or subwoofer
or subwoofer
1. This product
6. Antenna jack
7. Yellow
Connect to the constant 12 V supply terminal.
8. Red
Connect to terminal controlled by
ignition switch (12 V DC).
9. Black (chassis ground)
Connect to a clean, paint-free metal location.
31. Note
Change the initial setting of this unit.
The subwoofer output of this unit is monaural.
Fig. 1
圖1
2. Rear output or
subwoofer output
3. Front output
5. Fuse (10 A)
4. Wired remote input
27. Blue/white
Hard-wired remote control
Connect to system control
adaptor can be connected
terminal of the power amp or
(sold separately).
auto-antenna relay control
terminal (max. 300 mA 12 V DC).
10. White
14. Front speaker
11. White/black
15. Left
17. Green
32. Subwoofer (4 Ω)
18. Green/black
33. When using a subwoofer of 70 W (2 Ω), be sure to connect
with Violet and Violet/black leads of this unit.
Do not connect anything with Green and Green/black leads.
17. Green
19. Violet
34. Not used.
18. Green/black
20. Violet/black
12. Gray
14. Front speaker
13. Gray/black
16. Right
19. Violet
32. Subwoofer (4 Ω)
20. Violet/black
35. Subwoofer
(4 Ω)
2
Fig. 2
圖2