Pioneer Super Tuner IIID DEH-P6200BT Manuel d'utilisation - Page 20
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer Super Tuner IIID DEH-P6200BT. Pioneer Super Tuner IIID DEH-P6200BT 49 pages. Cd receiver
Également pour Pioneer Super Tuner IIID DEH-P6200BT : Manuel d'installation (8 pages)
Imprimer la page
02
After selecting, perform the following proce
dures to set the initial setting.
(multi language)
Menu language related to Bluetooth telephone can
be changed.
! Some characters may not be displayed properly.
1 Press
to display the setting mode.
2 Turn
to select the language.
English ESPAÑOL
(setting the clock)
1 Press
to display the setting mode.
2 Press
to select the segment of the clock dis
play you wish to set.
Hour Minute
As you select segments of the clock display, the
selected segment flashes.
3 Turn
to adjust the clock.
(clock on/off setting)
1 Press
to turn the clock display on or off.
(warning tone setting)
If the front panel is not detached from the head unit
within four seconds of turning off the ignition, a warn
ing tone sounds. You can turn off the warning tone.
1 Press
to turn the warning tone on or off.
/
(auxiliary input setting)
Activate this setting when using an auxiliary device
connected to this unit.
1 Press
to turn
(plug and play)
This setting allows you to switch your source to
automatically.
1 Press
to turn the plug and play on or off.
When USB storage device/iPod is con
nected, the source is automatically switched to
/
rage device/iPod, this unit's source is turned off.
When USB storage device/iPod is con
nected, the source is not switched to
automatically. Please change the source to
/
(display brightness setting)
20
En
on or off.
. If you disconnect your USB sto
/
manually.
1 Press
to display the setting mode.
2 Turn
to switch the brightness setting.
(high)
3 Press
to confirm the selection.
(rear output and subwoofer setting)
This unit's rear output (rear speaker leads output) can
be used for full range speaker (
(
) connection. If you switch the rear output set
ting to
, you can connect a rear speaker lead di
rectly to a subwoofer without using an auxiliary amp.
1 Press
to switch the rear output setting.
! When no subwoofer is connected to the rear
output, select
! When a subwoofer is connected to the rear
output, select
(demo display setting)
1 Press
to turn the demo display on or off.
(scroll mode setting)
When Ever Scroll is set to ON, recorded text informa
tion scrolls continuously in the display. Set to OFF if
you prefer the information to scroll just once.
1 Press
to turn the ever scroll on or off.
(resetting the Bluetooth wireless technology
module)
Bluetooth telephone data can be deleted. To protect
personal information, we recommend deleting this
data before transferring the unit to other persons. The
following settings will be deleted.
! phone book entries on the Bluetooth telephone
! preset numbers on the Bluetooth telephone
! registration assignment of the Bluetooth tele
phone
! call history of the Bluetooth telephone
! information of the connected Bluetooth telephone
/
1 Press
to show the confirmation display.
is displayed. Clearing memory is now on
standby.
If you do not want to reset phone memory, push
left. The display reverts.
2 Press
to clear the memory.
is displayed and the settings are deleted.
! While this function is in use, do not turn off
the engine.
(Bluetooth version display)
You can display the system versions of this unit and
of Bluetooth module.
1 Press
to display the information.
(low)
) or subwoofer
(full range speaker).
(subwoofer).