Pioneer X-EM26 Manuel d'utilisation - Page 7

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer X-EM26. Pioneer X-EM26 17 pages. System
Également pour Pioneer X-EM26 : Manuel d'utilisation (28 pages)

Imprimer la page

CAUTION

• When inserting the battery, make sure not to damage

the spring on the battery's - terminal. This can cause

the battery to leak or overheat.

Insert the battery by

aligning the

pole

against the remote

control's

terminal

• Do not use any battery other than the one specified.

• When loading the battery into the remote control, set it

in the proper direction, as indicated by the polarity

marks (+ and -).

• Do not heat the battery, disassemble it, or throw it into

flames or water.

• To prevent leakage of battery fluid, remove the battery

if you do not plan to use the remote control for a long

period of time (1 month or more). If the fluid should leak,

wipe it carefully off the inside of the case, then insert a

new battery. If a battery should leak and the fluid should

get on your skin, flush it off with large quantities of

water.

• When disposing of a used battery, please comply with

governmental regulations or environmental public

institution's rules that apply in your country/area.

• WARNING

Do not use or store batteries in direct sunlight or other

excessively hot place, such as inside a car or near a

heater. This can cause batteries to leak, overheat,

explode or catch fire. It can also reduce the life or

performance of batteries.

∫ Attaching the Non-skid pads

Apply the accessory non-skid pads to the bottom surfaces of

the speakers.

• Use the speaker is usually in an upright position.

Attach the non-skid pads to the bottom surface of the speakers.

If a battery pushes and

bends the

terminal

out of shape, there is

possibility of the alkaline

battery shorting out

The

terminal is bent

out of shape

The bottom surface of

the speaker

Part names and

functions

Overview of the main unit

4 5

• Switch between standby and on.

Remote control sensor

• Point the remote control to this, and then operate it

within approximately 7 m. The product may have

trouble capturing remote control signals if there is a

fluorescent light nearby. If this happens, move the

product away from the fluorescent light.

Main display

Bluetooth indicator (X-EM26 only)

• Connect to a USB storage device.

Disc tray

• Place the disc with the label side up.

INPUT

• Press repeatedly to select the input source.

• Skip to the previous track.

• Press and hold to play reverse quickly within a track.

• Tune to the previous radio station.

• Select a preset radio station.

• Skip to the next track.

• Press and hold to play forward quickly within a track.

• Tune to the next radio station.

• Select a preset radio station.

10 ∫

• Use to stop playback.

11 I

• Use to play, pause, or resume playback.

12 <

• Open or close the disc tray.

13 VOLUME

• Rotate to increase or decrease the volume level.