Pioneer XC-P410T Manuel d'utilisation - Page 34

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer XC-P410T. Pioneer XC-P410T 40 pages.

Imprimer la page

1. Table of Contents

TIMER PLAYBACK

To check timer settings

TIMER

SET

wae

ve)

WAKE

1 Press TIMER SET.

2 Press WAKE UP within 5 seconds.

Press once to select WAKE UP 1.

Press twice to select WAKE UP 2.

3 After 5 seconds,

the display changes to the

check mode, and timer settings are displayed in

order.

To change all of the timer settings, start over again, inputting

the settings that you want.

To change only one of the timer settings (after pressing

TIMER SET and WAKE UP 1 or 2), press TIMER SET repeatedly

until the display shows the item that you wish to change. Then

use

and"

+" to adjust the setting. Finally, repeatedly press

TIMER SET to advance to the end of the procedure.

NOTE:

If the AC power cord is unplugged or a power failure occurs,

set the timer again.

If you make a mistake while setting the

timer

Go ahead to the next item and continue setting the various

items until you finish. Then use the "To change timer settings"

procedure to change the value of the item that was incorrect.

Turning the timer on and off

After entering the timer settings, check the display section to

contirm which timer is on. The one that is lit (WAKE UP 1 or

2) is the one that will be executed.

ff you press WAKE UP to turn off the indication, the timer wil

not operate. However, since the settings remain stored in

memory, you can press WAKE

UP again to reactivate the

timer.

The SNOOZE function

]

SNOOZE

SNOOZE button

After timer playback begins, you can press SNOOZE on the

remote control unit to turn the power off temporarily. Itcomes

back on after about 5 minutes.

NOTE:

Power will stay off and play will not resume after 5 minutes if

SNOOZE is pressed when there is less than 5 minutes time

remaining in the timer setting.

SLEEP TIMER

SLEEP

30-———>-60

SLEEP button

OFF <«——— 30

Sleep timer - Automatically turns off

power.

Power turns off automatically after the specified time has

elapsed,

Each time SLEEP is pressed, the setting changes in the

following sequence: 90 — 60 - 30 -» OFF.

When sleep timer operates, the display section becomes less

bright. (Dimmer function}

Auto sleep

if SLEEP is pressed during recording, auto sleep is switched

on. Whenrecording finishes, power is automatically switched

off.

NOTE:

ff you press SLEEP during SLEEP operation,

the time

remaining till the power turns off is displayed. Do not press

SLEEP any more. Otherwise, the setting changes and the

sleep timer cannot function properly.

| TIMER

[

144