Pioneer XV-DV360 Manuel d'utilisation - Page 22

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer XV-DV360. Pioneer XV-DV360 48 pages. 5.1 home theater system with usb* connection for jpeg “slideshow with music”
Également pour Pioneer XV-DV360 : Spécifications (2 pages), Mise en place (2 pages)

Imprimer la page

USB playback

Chapter 5

USB playback

Using the USB interface

It is possible to listen to two-channel audio

and watch JPEG files using the USB interface

on the front of this unit. Connect a USB mass

storage device

as shown below.

With the player switched on, press USB.

Make sure your TV is on and set to the correct

video input.

Connect your USB device.

The USB terminal is located on the front panel.

Press

(play) to start playback.

If your USB device contains JPEGs, a

slideshow will start. See Playing a JPEG

slideshow on page 23 for more on this.

• Make sure USB DATA is showing in the

front panel display (or the system is in

standby) when disconnecting.

Note

1 This includes playback of WMA/MP3/MPEG-4 AAC files (except files with copy-protection or restricted playback). It is not pos-

sible to play DivX files through the USB terminal.

2 • Compatible USB devices include external magnetic hard drives, portable flash memory (particularly keydrives) and digital

audio players (MP3 players) of format FAT16/32. It is not possible to connect this unit to a personal computer for USB playback.

• Pioneer cannot guarantee compatibility (operation and/or bus power) with all USB mass storage devices and assumes no

responsibility for any loss of data that may occur when connected to this unit.

• With large amounts of data, it may take longer for the system to read the contents of a USB device.

USB

Type A

USB mass

storage device

Important

If a USB ERR message lights in the display, it

may mean that the power requirements of the

USB device are too high for this player, or that

the device is incompatible. Try the following:

• Switch the player off, then on again.

• Reconnecting the USB device with the

player switched off.

• Selecting to another input source (like

DVD/CD), then back to USB.

• Using a dedicated AC adapter (supplied

with the device) for USB power.

If this doesn't remedy the problem, it is likely

your USB device is incompatible.

Basic playback controls

The following table shows the basic controls on

the remote for USB playback.

Button What it does

Starts normal playback.

Pauses/unpauses playback.

Stops playback.

Press to start fast reverse scanning.

Press to start fast forward scanning.

Skips to the start of the current ﬁle,

then previous ﬁles.

Skips to the next ﬁle.