Pioneer AVH-P5900DVD Manuel d'installation - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Pioneer AVH-P5900DVD. Pioneer AVH-P5900DVD 9 pages. Pioneer avh-p5900dvd: install guide
Également pour Pioneer AVH-P5900DVD : Manuel d'installation (5 pages), Manuel d'entretien (16 pages)
Imprimer la page
Connecting the Units
When connecting with a rear view camera
When using this product with a rear view camera, automatic switching to video from a rear
view camera when the gear shift is moved to REVERSE (R) position is possible.
WARNING
USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY
RESULT IN INJURY OR DAMAGE.
CAUTION
•
The screen image may appear reversed.
•
The rear view camera function is to be used as an aid for backing into a tight parking spot. Do not use this
function for entertainment purposes.
•
Objects in the rear view may appear closer or more distant than they actually are.
CAUTION
You must use a camera
This product
which outputs mirror
reversed images.
Rear view camera input
(REAR VIEW
CAMERA IN)
Rear view camera
20 cm (7-7/8 in.)
To video output
RCA cable
(sold separately)
10 cm (3-7/8 in.)
8 m (26 ft. 3 in.)
Extension lead (supplied)
Fuse resistor
Violet/white
Of the two lead wires connected to the back lamp, connect the
one in which the voltage changes when the gear shift is in the
REVERSE (R) position. This connection enables the unit to
sense whether the car is moving forwards or backwards.
Connection method
2. Clamp firmly with
1. Clamp the lead.
needle-nosed pliers.
Note:
• It is necessary to set CAMERA POLARITY properly in SYSTEM MENU when
connecting the rear view camera.
When connecting with a multi-channel processor
15 cm (5-7/8 in.)
IP-BUS input
44 cm (1 ft. 5 in.)
Blue
(Blue)
AV-BUS input
AV-BUS cable (supplied
(Blue)
Blue
with DVD player)
IP-BUS cable
DEQ output (SUBWOOFER
This product
(supplied with DVD
OUTPUT or DEQ OUTPUT)
player)
Black
20 cm (7-7/8 in.)
RCA cable (supplied with
Optical cable (supplied with
multi-channel processor)
Optical cable connection box
multi-channel processor)
(supplied with multi-channel
processor)
Optical cable (sold
DVD player (e.g., XDV-P6)
separately)
(sold separately)
Blue
Black
Blue
Hide-away unit (supplied
with DVD player)
Black
Blue
Black
Black
25 pin cable (supplied
Multi-channel processor
with DVD player)
(e.g., DEQ-P8000)
(sold separately)
IP-BUS cable (supplied
with TV tuner)
Black
Blue
IP-BUS cable
Black
Blue
IP-BUS cable (supplied with
multi-channel processor)
Multi-CD player
When you connect a separately sold
(sold separately)
Hide-away TV tuner
DVD player to the separetely sold
(e.g., GEX-P5700TV)
multi-channel processor, the optical
(sold separately)
cable from DVD player must be
connected to the optical cable 2 input
(OPT. IN2) of the multi-channel
processor.
AV-BUS cable (supplied
Black
with TV tuner)
Connecting and installing the
optical cable connection box
WARNING
• Avoid installing this unit in locations where the
operation of safety devices such as airbags is pre-
Optical cable
vented by this unit. Otherwise, there is a danger of
a fatal accident.
• Avoid installing this unit in locations where the
operation of the brake may be prevented.
Otherwise, it may result in a traffic accident.
Installing the optical cable
• Fix this unit securely with the velcro tape or lock
connection box
tie. If this unit is loose, it disturbs driving stability,
which may result in a traffic accident.
• When installing the optical cable
CAUTION
connection box with the velcro
• Install this unit using only the parts supplied with
tape.
this unit. If other parts are used, this unit may be
damaged or could dismount itself, which leads to
Install the optical cable connection box
an accident or other problems.
using the velcro tape in the ample space
• Do not install this unit near the doors where rain-
of the console box.
water is likely to be spilled on the unit. Incursion
of water into the unit may cause smoke or fire.
Connecting the optical cable
Velcro tape (hard)
1. Connect the optical cable and
Velcro tape (soft)
ground lead to the main unit.
Connect the optical cable so that it does
not protrude from the unit, as shown in
the illustration. Fasten the ground lead
to the protrusion on the back of the
unit.
• When installing the optical cable
connection box with the lock tie.
Wrap the optical cable and connection
box with the protection tape and fasten
with the power code using the lock tie.
Wrap with the protection tape
Screw
2. Connect the optical cable to the
optical cable connection box.
Fasten with the lock tie
ENGLISH
When connecting the external video component and the display
Rear monitor output
(REAR MONITOR OUTPUT)
To video input
Display with
RCA input jacks
(sold separately)
15 cm (5-7/8 in.)
This product
RCA cables (sold separately)
Video input
(VIDEO INPUT)
To video output
External video
25 cm (9-7/8 in.)
component
(sold separately)
Audio input
To audio outputs
(AUDIO INPUT)
• It is necessary to set AV INPUT to VIDEO in SYSTEM MENU when connecting the
external video component.
• It is necessary to set AV INPUT to S-DVD in SYSTEM MENU when connecting a
multi-DVD player.
When using a display connected to rear video output
This product's rear video output is for connection of a display to enable passengers in the
rear seats to watch the DVD or Video CD.
WARNING
• NEVER install the display in a location that enables the Driver to watch the DVD or Video CD
while driving.