Pioneer AVH-P5900DVD Manuel d'installation - Page 4
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Pioneer AVH-P5900DVD. Pioneer AVH-P5900DVD 5 pages. Pioneer avh-p5900dvd: install guide
Également pour Pioneer AVH-P5900DVD : Manuel d'installation (9 pages), Manuel d'entretien (16 pages)
Imprimer la page
Connecting the Units
Connecting the power cord
Note:
Depending on the kind of vehicle, the
function of 3* and 5* may be different.
In this case, be sure to connect 2* to 5*
and 4* to 3*.
3*
5*
Cap (1*)
Do not remove cap if this
terminal is not in use.
Yellow (3*)
Back-up
(or accessory)
Red (5*)
Accessory
(or back-up)
Orange/white
Connect to lighting switch terminal.
Black (chassis ground)
Connect to a clean, paint-free metal location.
ISO connector
Note:
In some vehicles, the ISO connector may be
divided into two. In this case, be sure to
connect to both connectors.
When you connect the separately sold multi-
channel processor (e.g., DEQ-P6600) to this
unit, do not connect anything to the speaker
leads and system remote control
(blue/white).
3
IP-BUS input
(Blue)
1*
2*
4*
Yellow (2*)
Connect to the constant 12 V
supply terminal.
Red (4*)
Connect to terminal controlled by
ignition switch (12 V DC).
15 cm
IP-BUS cable
Antenna cable
Connect leads of the same
Multi-CD player
color to each other.
(sold separately)
Fuse (10 A)
Speaker leads
Front left +
White:
White/black: Front left ≠
Front right +
Gray:
Gray/black: Front right ≠
Rear left + or subwoofer +
Green:
Green/black: Rear left ≠ or subwoofer ≠
Rear right + or subwoofer +
Violet:
Violet/black: Rear right ≠ or subwoofer ≠
14 cm
This product
15 cm
Fuse resistor
Fuse resistor