Pioneer DEH-X7800DAB Manuel du propriétaire - Page 7
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Pioneer DEH-X7800DAB. Pioneer DEH-X7800DAB 28 pages.
Imprimer la page
Menu Item
Description
DAB ANT PW
Supply power to a DAB antenna. Select this when using the
optional DAB antenna (AN-DAB1, sold separately) with the unit.
[ON]
[OFF]
No power is supplied to a DAB antenna. Select this when using a
passive antenna with no booster.
SYSTEM RESET
Select [YES] to initialize the unit settings. The unit will be
restarted automatically.
[YES], [CANCEL]
(Some of the settings may be retained even after resetting the
unit.)
Digital Audio Broadcasting (DAB)
(Only for DEH-X7800DAB/MVH-X580DAB)
To receive DAB signals, connect a DAB antenna (AN-DAB1) (sold separately) to the unit.
Seeking a service component
1
Press SRC/OFF to select [DIGITAL RADIO].
2
Press BAND/
to select the band from [D1], [D2] or [D3].
3
Press
/
to select a service component.
NOTE
Press and hold
/
then release to seek an available service. Scanning stops when the unit
receives a service.
To select service component from service lists
1
During DAB reception, press
Displays the list of all service components. Press
component alphabetically.
2
Select a service component from the list you selected, then press the M.C. dial to
confirm.
NOTE
You can update the service list by pressing and holding
6
En
.
again to search for a service
. To cancel updating, press
Presetting service components
To store service components
1
While receiving the service component you want to store, press and hold one of
the number buttons (1/
To receive stored service components
1
Select the band, then press a number button (1/
Pause/Time shift functions
The unit stores recent broadcasts in the memory automatically. The memory capacity of
this unit varies depending on the bit rate of the service component used. The
approximate memory capacity is five minutes for 192 kbps.
To pause/resume
1
While receiving the service component, press and hold DISP.
To use the time shift function
1
While receiving the service component, press and hold BAND/
2
Press
(skip back one minute)/
playback point.
Radio
The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the
Middle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS
(radio data system) function only works in areas that broadcast RDS signals for FM
stations.
Receiving preset stations
again.
1
Press SRC/OFF to select [RADIO].
2
Press BAND/
Autogoods "130"
to 6/
) until it stops flashing.
to 6/
(skip forward one minute) to adjust the
to select the band from [FM1], [FM2], [FM3], [MW] or [LW].
).
.