Pioneer VSX-D701S Manuel d'utilisation - Page 36

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer VSX-D701S. Pioneer VSX-D701S 41 pages. Audio/video stereo receiver

Imprimer la page

1. Specifications

REMOTE CONTROL OPERATION

MULTI-EDIT MODE

A maximum

of seven commands

can be programmed

into MULTI

COMMAND button. This enables a series of signals to be transmitted

simply by pushing the MULTI COMMAND

button.

(Example) Programming the following three commands into the MULTI

COMMAND button.

(@) RECEIVER POWER

(2) RECEIVER FUNCTION CD

@ CD PLAY (>)

1. Press the EDIT button, (Switches to the EDIT made}

® The VCR 1, VCR 2, and TV CONTROL MODE buttons flash in

sequence.

2. Press the MULTI COMMAND button. (Switches to the MULTI-EDIT

mode}

® The CONTROL MODE buttons flash at random.

3. Press the RECEIVER POWER button.

{Registration is completed)

4. Press the CD receiver input selector button.

* The CONTROL MODE buttons go out, and then flash at random.

(Registration is completed}

5. Press the CD CONTROL MODE button.

® The CD button flashes.

6. Press the PLAY (® } button.

® The CD button goes out, and then the CONTROL MODE buttons

flash at random. (Registration is completed)

7. Press the MULTI COMMAND button.

®@ The CONTROL MODE buttons light in sequence. (This means that

registration has been completed}, and then the VCR 1, VCR 2, and

TV buttons flash in sequence.

Press the EDIT button.

® The EDIT mode is canceled.

If you press the MULTI COMMAND button, these remote control signals

are transmitted in the order programmed, so if CONTROL IN/OUT is

connected (refer to page 15}, and if remote control signals can reach

both the receiver and CD player sensor windows, power to the receiver

switches on, the input selector switches to CD, and the CD player starts

playing. (When the CD piayer's power cord is plugged into the receiver's

switched AC OUTLET.)

NOTE:

° After pressing the seventh command,

the MULTI-EDIT mode is

registered automatically (The VCR 1, VCR 2, and TV CONTROL MODE

buttons flash in sequence}, but the EDIT made is not. canceled. To

cancel the EDIT made, press the EDIT button.

After memorizing six or fess commands, if you cancel the EDIT mode

without pressing

the MULTI

COMMAND

butten again,

all the

registered commands are cleared, leaving the previous commands as

they were,

#f @ button is for transmission, even if it is not an operation button in

the selected CONTROL MODE, registration is stiff possible. (Buttons

such as the VCR 1 pea.)

In this case, during signal transmission, the CONTROL MODE button

momentarily lights, but the remote controf code is not transmitted.

If the component to be operated is installed at a distance, if there is

an obstacle between a specific component sensor windew and the

remote control, or if component operation speeds are very different,

MULTI-COMMAND

operation may be incarrect,

When

repeating

operations, first return to the initial settings for each component. For

operations such as power ON/OFE, if components are switched ON,

they can be switched OFF by transmitting a signal.

pee

| RETURNING TO THE INITIAL SETTINGS _

VSX-D701S

Initialization of particular CONTROL MODES

1. Remove the battery compartment cover.

2. While pressing the M.CLEAR button inside the cover, press the

button for the CONTROL MODE (for example VCR 1} you want

to initialize.

above, the CONTROL MODE button lights for about one second,

and the VCR 1 operation buttons are initialized.

M.CLEAR button

Initializing the entire memory

1, Remove the battery compartment cover.

2. While pressing the M.CLEAR button inside the cover, press the

RESET button.

¢ Do not release the M.CLEAR button before releasing the RESET

button. While pressing the M.CLEAR button, press the RESET

button, and quickly release.

Initialization is not possible if the buttons are pressed in the reverse

order.

® All the CONTROL MODE operation buttons are initialized, and data

in the MULT] COMMAND button is cleared.

RESET button.

M.CLEAR button

VSX-D601

All preset signals are cleared if the RESET button is pressed, thereby

returning the unit to its initial condition.