Dinam Led DN-RF3600 Manuel de démarrage rapide
Parcourez en ligne ou téléchargez le pdf Manuel de démarrage rapide pour {nom_de_la_catégorie} Dinam Led DN-RF3600. Dinam Led DN-RF3600 2 pages.
Imprimer la page
DN-RF3600
LED RGB Controller
DN-RF3600 is a multi-functional RGB LED controller, use the advanced PWM (Pluse-Width
Modulation) control technology, built-in 16 kinds of change mode. Smooth changing effect,
without flicker;
PC engineering plastic shell, light volume, exquisite appearance;
has 8 buttons, which are used for namely on/off, PAUSE, MODE+/-, SPEED+/-, BRT+/-,
compatible with RF remote (100m control distance ). DC12V-24V wide voltage input, 3CHs
output (common anode), wildly used for all kinds LEDs with current-limiting resistor, like RGB
LED modules, LED strips, SMD and so on.
1. Technical Specs:
Power Supply Chosen
Input Voltage
Max Current Load
Max Output Power
Grey Scale
Remote Controlling Distance
Radio Frequency Range
RF Remote Output Power
Working Temperature
Dimension
Package Size
Weight (G.W.)
warranty
5 years
The receiver
DC CV SMPS
～
DC12V DC24V
6A
×
3CH
216W/432W(12V/24V)
1024×1024×1024
100m
433.92MHz
8mW
℃
℃
-30
-55
L211×W40×H30(mm)
L313×W50×H32(mm)
230g
1
2. Product Dimension:
211mm
10mm
3. Operation Instructions:
8 function buttons on the receiver, which is corresponding to the first 8 button on the remote: namely
ON/OFF, PAUSE, MODE+,MODE-, SPEED+,SPEED-, BRT+,BRT-.
ID learning Method:
Learning ID:
Press on/off on the receiver for 3s, the RF LED green indicator will be on, then press any
key on the remote, when indicator becomes off means activated.
Cancelling ID:
Press "on/off" on the receiver for 5s, the RF green indicator flashes once, then press any
key on the remote, when the indicator flashes several times means deactivated..
RF remote
Receiver Sign
Button
Control Sign
ON/OFF
PAUSE
MODE+
M
M
MODE-
SPEED+
S
S
SPEED-
BRT+
B
B
BRT-
4 DIY
M1
M2
Keys
M3
M4
Attn:
Press Mode- for 3s, merely play the changing DIY modes, the static color will be skipped.
10mm
Description
Turn on/off the receiving controller.
Press to stop changing.
Press again to continue.
Attn: press for 3s to turn on/off the buzzer.
Press
MODE+/-
to change modes
Press
MODE+
for 3s to auto cycle loop all the modes
Press
MODE-
for 3s to
4 DIY modes
Press to speed up or slow down.
Press
SPEED+
for 3s, the changing speed of all modes
revert to factory defaults
.
Press
SPEED-
for 3s, the changing speed of
will revert to factory defaults.
Press to increase/decrease the brightness.
Keep pressing to change the brightness Continuously
Press for 3s to save your desired lighting effect.
Max 4 modes, could save repeatedly.
Press "Mode-" in 3 seconds, the receiver will auto play these
4 DIY modes.
2
will
current mode