Pioneer VSX-604S Manuel d'utilisation - Page 24
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer VSX-604S. Pioneer VSX-604S 34 pages.
Imprimer la pageI S
Intelligent
System Control
OPERATING USING GUI
GUI
GUI (Graphic User Interface) lets you use the TV screen to operate the system.
¢ Press the GUI MODE button on this unit or the G.U.I. button on the remote control, and operation indications for the currently
selected function are displayed on the TV screen.
* Tooperate, use the AVi><1 buttons on the remote control (they light up when the GUI mode is ON) or the multi-jog on this unit
to move the cursor (the hand shaped mark) displayed on the TV screen. When the cursor is on the button you want to operate,
press the ENTER button.
© V\hen the operating instructions say "Press the button", this means move the cursor to the desired button and press the ENTER button.
NOTE:
If you do not perform any of the operations above within 10 ~ 30 seconds, the GUI display is canceled.
RECEIVER CONTROL BUTTONS
© The buttons in the following explanation are the receiver
operation button indications common
to all function
displays. (The illustration shows LD operation indications.)
(Figure 1: Main Menu display)
O@® ©
@) SURR MODE
(Surround Mode):
Swithces between the three SFC modes and the DOLBY
PRO-LOGIC mode as follows.
DOLBY PRO-LOGIC SURROUND
—-
STUDIO
OFF
~.
ARENA .— SIMULATED SURROUND
The selected mode is displayed on the right of the function
indications.
:
@ 3CH LOGIC:
Switches DOLBY 3CH LOGIC ON/OFF.
When ON, "3CH LOGIC" is displayed on the right of the
function indications.
@ SUPER BASS:
Switches SUPER BASS ON/OFF.
When ON, "SUPER BASS" is displayed on the right of the
function indications.
@ COPY:
Press to record a laser disc on your VCR.
When you press this button, the display changes to COPY
indications. (This button is displayed only when the function is LD.)
24
<ARB7022>
(Figure 2: Sub Menu display)
@ SURR EDIT (Surround Edit):
Press to make adjustments such as level setting for the
currently selected surround mode or DOLBY 3CH LOGIC.
When
you press this button, the display changes
to
SURROUND
EDIT indications.
NOTE:
You cannot press this button when the surround mode is OFF.
© SET UP:
Press this button and the display changes to the SET UP
MENU. (See pages 29,30)
@ Display change button:
Switches between Main Menu display (Figure 1) and Sub
Menu display (Figure 2).
® SLEEP
This operates the sleep timer. Move the cursor to this button,
and each time you press the ENTER button, timer settings
change as follows.
c* 90min—>60min—+30min—+Omin (off) eat
© SYSTEM OFF
Switches power to this unit, the TV, and the currently selected
function OFF.
NOTE:
When you press the SYSTEM OFF button, power to components
not made by Pioneer switches ON if power to these components
was already switched OFF.