Pioneer VSX-D510 Manuel d'utilisation - Page 14

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer VSX-D510. Pioneer VSX-D510 40 pages. Audio/video multi-channel receiver
Également pour Pioneer VSX-D510 : Manuel d'utilisation (36 pages), Manuel d'entretien (14 pages)

Imprimer la page

Preparations

SURROUND speakers distance setting

mode

Use to set the SURROUND speakers distance. Like the

CENTER speaker position, the SURROUND speakers

may be set in a location closer or farther than the

FRONT speakers. Set the distance of the SURROUND

speakers accurately to hear sounds coming from both

FRONT and SURROUND speakers at the same time.

Press % or ﬁ to set the distance of the

SURROUND speakers from the main

listening position (within a 9.0 m range).

MEMO:

• The initial setting is 3.0 m.

• When "S

" is selected in SPEAKERS setting mode,

the SURROUND distance cannot be set.

• One step equals about 0.3 m.

Dynamic range control setting mode

Dynamic range is the difference between the loudest and

softest sounds in any given signal. The dynamic range

control helps you play back sounds so the quieter

sounds are audible yet the louder sounds don't get

distorted. It does this by compressing the dynamic

range, in other words pushing all the sounds towards the

same relative volume level. When watching a movie at

low volume, setting this function enables low level

sounds to be heard more easily but you won't be jolted

by louder sounds.

Press % or ﬁ to set the dynamic range

control (OFF , MAX, or MID).

MEMO:

• The initial setting is "

• When the volume level is increased, set to "

• For listening enjoyment at low volumes, set to "

for maximum dynamic range compression.

• Dynamic range control is effective only when a Dolby

Digital signal is being played back.

OFF

Dual mono setting mode

The dual mono setting can only be used when listening

to Dolby Digital discs that have dual mono software

encoded in them. As of now these are not that widely

used. With this setting you can choose which channel in

the dual mono setting you want to listen to. Thus, it is

useful for soundtracks that have one language on one

channel and a different language on the other.

Remember you can only use this setting if you have

Dolby Digital software with this feature and want to

isolate one of the channels therein.

There are two different ways to route the sound in the

dual mono setting, one is with Dolby Digital mode on,

the other with Dolby Digital mode off. If Dolby Digital

mode is switched on, the

through your center speaker, the

channel 2 through your center speaker

Digital mode off, the dual mono sound routing is as

follows: In the

of both front speakers. In the

channel 2 out of both speakers. In the

setting the speakers will play the soundtrack

independently of each other. The left front speaker will

play channel 1 and the right front speaker will play

channel 2.

Press % or ﬁ to cycle through the possible

DUAL MONO settings.

L. c 1 R. c 2

ch2

MEMO:

• The default setting of this feature is

Coaxial digital input setting

Here you tell the receiver what component you have

MAX

hooked up to the coaxial digital input jack.

Press % or ﬁ to select the coaxial digital

input (DVD, TV, CD, CD-R, VCR or OFF).

After you assign a component to the digital jack,

whenever you select that component, for example a

DVD player, the receiver will automatically change to

the digital input setting. You can see this in the

ANALOG DIGITAL

receiver.

MEMO:

• The initial setting is "

setting will play channel 1

ch1

setting will play

ch2

With Dolby

setting your will hear channel 1 out

ch1

setting you will hear

ch2

L. c1 R. c2

ch1

ch 1

indicator on the front of the

DVD