Pioneer A-335 Manuel d'utilisation - Page 9
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer A-335. Pioneer A-335 37 pages.
Également pour Pioneer A-335 : Manuel d'utilisation (13 pages), Manuel d'entretien (46 pages)
Imprimer la page
TROUBLESHOOTING
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the
points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used.
If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest PIONEER authorized service center or your
dealer to carry out repair work.
Symptom
Probable Cause
No power supplied to unit
e
e
No sound
No sound from one speaker
Can't record tapes
Power plug is disconnected from outlet.
The component power plug has been plugged
into another
component
power
outlet (e.g.
timer,
etc.),
but
power
to
that
unit
is
disconnected.
Connecting
cords
are
disconnected
from
terminals, or connected incorrectly.
Terminals, or connecting cords pin plugs are
dirty.
The INPUT SELECTOR switch is not set to the
desired input source.
Operation of other components is incorrect.
Both SPEAKERS
selector switches are set to
OFF.
MUTING switch is in the ON position (=).
Connecting
cords
or
speaker
cords
are
disconnected on that side.
BALANCE control is set to one side.
The position of the REC SELECTOR switch is
incorrect.
Connections are incorrect.
Operation of tape deck is incorrect.
Can't perform tape copying
The position of the REC SELECTOR switch is
incorrect.
Operation of tape decks is incorrect.
Insert plug securely into outlet.
Turn on power to the other component.
Connect securely.
Clean terminals and plugs.
Set the switch
correctly
(PHONO,
TUNER,
CD, LINE, DAT/TAPE 1, TAPE 2).
Consult the operating instructions for the other
components.
Set one switch or both switches to ON.
Set the MUTING
switch to the OFF position
(M2).
Connect securely.
Set BALANCE contro! to center position.
Set
switch _ correctly
section
RECORDING TAPES).
Reconnect properly.
Consult the operating instructions for the tape
deck.
(See
Set switch correctly (See section COPYING
TAPES).
Consult the operating instructions for the tape
decks.
9
<ARE1112>
E