Pioneer A-J7 Manuel d'utilisation - Page 4

Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer A-J7. Pioneer A-J7 7 pages.

Imprimer la page

CONNECTIONS

Components to be connected (See page 2.)

() Turntable

@ CD player or tuner (FD-J7 etc.)

(3) Power cord

Connect this cord to an AC wall socket, or the AC outlet of an optional

FD-J7.

(4) To AC outlet

©) Speaker system (L)

@) Cassette deck

Digital audio tapedeck

(9) To stereo CD tuner (FD-J7)*

(@ To Double cassette deck (T-J7)*

* Connect here when using only the T-J7 and/or FD-J7.

When using the T-J7 or FD-J7, be sure to connect here. You can then

use such functions as auto function and A:S.E.S. (Auto Synchro

Editing System).

OUT jack (only when using the FD-J7)

Connect to the CONTROL IN jack of a component bearing the Kil mark.

If you connect to another Pioneer component bearing the

mark,

remote control is possible by pointing the component's remote control

unit at the FD-J7 CD tuner and operating. This unit cannot receive

remote control signals.

@ LINE terminals (Other audio devices)

CONNECTING THE SPEAKERS

Connect a speaker system with an impedance level of 4 to 16 ohms.

1. Remove the vinyl insulation and twist the wire.

2. Unscrew

the terminal, and push the wire into the hole.

3. Tighten the terminal to fix the wire.

NOTE:

Make sure cord wires connected to the terminals do not stick out and

touch other wires. If this occurs, the component may malfunction.

CONNECTING INPUT/OUTPUT CORDS

Connect the white plug to the L (left) side, and the red plug to the R

(right) side. Be sure to insert the plugs securely.

Left channel

White plug

tee

Right channel ~@

Red plug

CONNECTION OF A GRAPHIC EQUALIZER OR AN

AUDIO ADAPTOR

NOTE:

Remove the shorting bars only when connecting a graphic equalizer to

ADAPTOR terminals. Always keep the bars inserted while the terminals

are not in use, and take care not to lose them.

Shorting bars

INDGSS:

y33

ee (co:

[apea608688

808008200

Graphic equalizer

CONNECTING THE POWER CORD

If you use it in conjunction with the FD-J7 stereo CD tuner, connect

to the FD-J7's power outlet.

AC OUTLET (SWITCHED)

Power supplied through this outlet is turned on and off by the

amplifier's POWER switch. Total electrical power consumption of

connected equipment should not exceed 100 W.

NOTE:

as heaters, irons, or television sets to the AC OUTLET

in order

to avoid overheating or fire risk.

¢ When using the T-J7 Double cassette deck, connect the T-/7's

power cord.