Pioneer CD-R1546ZH Manuel d'entretien - Page 45
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Pioneer CD-R1546ZH. Pioneer CD-R1546ZH 46 pages. Multi-cd control rds tuner amplifier
Imprimer la page
AUTOMATIC TUNING ......... [5]
The radio automatically tunes in to a
station with a strong signal above a
∞
certain level. Press (
) or (
[5].
MANUAL TUNING ....... [7]
This is useful for tuning in to a station
with a very weak signal that cannot be
picked up with automatic tuning.
1.Continue pressing button [7] for 2 or
more seconds. (Until you hear a
beep.)
2.Select a station by pressing the (
5
or (
) side of button [5].
If you do not press a button for more
than 10 seconds, you will hear a
beep and automatically be returned
to AUTOMATIC TUNING mode.
Advice
• When returning to automatic
tuning, continue pressing button
[7] for 2 seconds or more once
again. (Until you hear a beep.)
PLAYING CD
• The proper Honda CD changer (sold
separately) is required to play CDs.
[ 2 ]
[ 3 ]
[ 5 ]
NEWS
TP
AF
REG
TA
CH
[ 11 ]
[ 10 ]
• Keep both hands on the
handlebars while riding.
MEMORIZING STATIONS
(PRESET MEMORY)
A selected station is memorized in one
of buttons [10].
5
) button
Memorizing a Station ............. [10]
Choose one of buttons [10], and hold it
[5]
2
down until you hear a beep (about 2
seconds). The preset number ⁄ will
light, and the station will be
memorized in the chosen button.
Advice
• The radio cannot be heard while
∞
)
the button is being held down.
Recalling a Station
(Direct Recall) .......................... [10]
When the button [10] is pressed again
after a station has been memorized, the
radio will be tuned to the station stored in
that button. The number of the pressed
button lights in ⁄ on the display.
Recalling a Station
(Sequential Recall) .................. [11]
Each time you press button [11],
stations stored in the buttons [10] are
recalled in order.
LISTENING
TO A CD ..................... [2]
When button [2] is pressed, CD playback
starts and the disc number
fi and "CD" ‹
number
display. Playback is stopped by pressing
[ 9 ]
button [9].
Advice
ST
RPT
• If there is no magazine in the CD
A.SEL
changer, "EJECT" will appear on
the display.
SELECTING A DISC ............ [10]
Press the button in [10] with the same
number as the number of the disc you
want to play.
Advice
• There is a delay of several seconds
before the music starts after
pressing the button, due to the
disc changeover operation.
SCU-M2096ZH,CD-R1546ZH
AUTO SELECT ........... [1]
Broadcasts of high output stations can
be memorized in button [10] of UT
(FMT) band according to the following
procedure.
2
1. Press button [1] to switch over band
to U1, U2 or UT.
2. Press button [3] to start automatic
memorization of high output stations.
Through automatic memorization
operation,"A.SEL" * is displayed.
("A–SEL" flashes (.)
Advice
• There is no audio output in
automatic memorizing operation.
• When automatic memorization is
started with U1/U2 band, the same
is performed for UT band that is
automatically switched on to
follow U1 and U2 bands.
• Automatic memorization cannot be
activated for MW and LW bands.
3. With completion of general automatic
memorization, "A.SEL" * goes out
and the radio receives broadcast of
the highest output station.
OTHER FUNCTIONS
Stereo Indicator
When the radio is tuned to an FM stereo
station, "ST" & will be displayed.
TRACK SELECTION
[9]
(TRACK NUMBER
SEARCH) .................. [5]
›
, track
Press the (
appear on the
for a moment (less than 0.5 seconds),
and press the button repeatedly until
you reach the track you want to play.
Each time you press button [11], tracks
change in order.
FAST FORWARD
AND REVERSE ...................... [5]
Press the (
until you hear a beep (0.5 seconds or
more).
Advice
• Playback can be heard during fast-
forwarding or reversing.
• Fast-forwarding or reversing is
performed only as long as the
button is pressed.
[3]
[11]
∞
5
) or (
) side of button [5]
0.5
∞
5
) or (
) side of button [5]
45