Pioneer CT-F10 Manuel d'utilisation - Page 32
Parcourez en ligne ou téléchargez le pdf Manuel d'utilisation pour {nom_de_la_catégorie} Pioneer CT-F10. Pioneer CT-F10 40 pages. Stereo cassette deck
Également pour Pioneer CT-F10 : Manuel d'entretien (28 pages), Instructions d'utilisation supplémentaires (21 pages), Manuel d'entretien (28 pages)
Using the timer features you can automatically record a
program from the tuner at a certain time, wake up to a CD
playing, or fall asleep at night to the radio. These functions
are available from the timer menu, which is accessed by
pressing the
button. The menu has four options.
TIMER
– Set the system to switch on and start playing at a
certain time (for example, at the same time as your alarm
clock goes in the morning).
– Set the optional tape deck, MD or CD-Recorder
to record
from the auxiliary inputs or
certain time.
– Set the system to switch off at a certain time
(for example, half an hour after you go to bed).
– Set the clock to the correct time (see page
14). Remember, the timer functions won't work properly
unless you've set the clock!
a radio program at a
Once set, the wake-up timer will remain active (i.e., it will
switch on the system every day) until you cancel it (see
Cancelling the wake up timer below). You can wake up to
the sound of any component in the system, but not a
component connected to the auxiliary inputs. To set the wake
up timer, you'll need to tell it which component to start
playing, what time to start, and also what time to stop.
CD
TUNER
AUX
DIRECT PLAY 3
CD-R
MD
TAPE
TIMER
4
¢
SET
For example, press the CD button and load a CD into the
player (no need to start it playing). If you're using the tuner,
tune in to a radio station. Remember to set the volume at a
suitable level.
switch between timer menu options using the
4 and ¢ buttons; select the option by pressing
4
¢
First, set the hour: use the 4 and ¢ buttons to change
the flashing hour display, then press
Next, set the minute: use the 4 and ¢ buttons to
change the flashing minute display, then press
.
.
.