Pioneer DC-220Z Manuel d'entretien - Page 5
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Pioneer DC-220Z. Pioneer DC-220Z 47 pages. Stereo double cassette tape deck amplifier
Imprimer la page2.FRONT
PANEL FACILITIES
Deck I! (Recording/Playback)
Deck | (Only for playback)
@
REC indicator
This lights during the recording mode.
@
POWER indicator
@
POWER switch
@
HEADPHONES jack
@
GRAPHIC EQUALIZER controls
By operating these five controls, equalization effects can be added to program
source or tape playback sounds.
@
BALANCE control
@
FUNCTION switches
TAPE
( a0 ): Push when playing back tapes.
CD/VIDEO{
%©
}: Push when listening to a component connected to the
CD/VIDEO terminals.
TUNER
( #
): Push when listening to broadcasts on the tuner.
PHONO ({ @
): Push when playing records on the turntable.
©
VOLUME control
©
PLAY switch
(> )
Dc-2212Z/220zZ
@
REW switch { «<< )}
@
STOP/ EJECT switch ( ~~ )
@® REC switch ( ° )
@
PAUSE switch ( =
)
@
HIGH SPEED COPY switch
OFF ( Ill ): Tapes are copied at the normal speed.
ON ( mm ): Tapes are copied at twice the normal speed.
NOTE:
¢
Do not change the switch position during tape copying.
¢
When
this switch is set to the ON position, recording of an external
source {equipment connected to the CD/VIDEO terminals, a turntable
or tuner) is not possible. When not performing high speed tape copying,
always leave in the OFF position.
@
*DOLBY
NR switch
Push this switch to ON when recording with the built-in Dolby noise reduction
system
(B type),
and
when
playing
back
tapes
which. have been
recorded
using the system.
Aa "ia "ih ih ih
1A TATTOO TACT
TA TA TATA IA TATA TATA TATA TAS
*Noise Reduction manufactured under license from Dolby Laboratories Licens-
ing Corporation.
"Dolby" and the double-D symbol are trademarks of the Dolby Laboratories
Licensing Corporation.
aia 1h "1h 1h 1h 1h TATA TOOT
TOT
AO
AA
ATA AAA TA TAA CAAA CATA
@
TAPE COUNTER
This indicates the transport position of the tape loaded in Deck iI with a three-
digit number.
@
RESET button
Push this button to reset the tape counter display to 000.
@
SYNCHRO
REC START switch
When this switch is pressed, Deck | will enter the playback mode, and Deck tl
will simultaneously begin recording.
@
REC MUTE
switch
Use for creating non-recorded blank spaces on the tape.