Pioneer GM-4200 Manuel d'entretien - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Pioneer GM-4200. Pioneer GM-4200 35 pages. Bridgeable power amplifier
Également pour Pioneer GM-4200 : Manuel d'entretien (36 pages)

Imprimer la page
GM-HSQO
When Combined with a Car Stereo with
RCA Pin Jacks
Green stripes
Black stripes
Right-hand speaker
(Front of amplifier)
Battery lead fuses 130 A x 2)
Note
Connection of the speaker leads for two channels (stereo)
is different from connection of the speaker leads for one
channel (mono). (See 'Connecting the Speaker Leads" on
page 10.)
Red
El
jinnnjyyn^mnrjvvuvtn
Connect both terminals to the car
body or to a metal part in contact
with the body
Black
Black
After all the other leads have been
connected, connect both terminals
to the positive 1+) terminal of the
battery
Fuse (30A)
Red
"i ^
s
t—\—^
-
Compulsory fan
cooling air outlet
1 u AnArinrjiru
M
n
Car stereo wfth
RCA pin jacks
White
Connecting leads with RCA
pin plugs Isold separately}
- (Rear of amplified
Set the selector to
the left position.
Red White pjo connection
Blue
hi —i
Blue
Connect the male terminal of this lead to the blue lead of the
car stereo (system control terminal). The female terminal can
be connected to the auto-antenna relay control terminal.
Yel low/Black
Red
Fuse(30A)
Gromment
Fuse resistor
Red/Black
Fuse I3A)
Do not connect anything to this
lead (connect the yellow lead of a
car stereo equipped with pin jacks
to the proper lead designated
locations).
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
When Combined with a Car Stereo with
DIN Sockets
n r-a
—
u
—CZJ
Oht
-
See Note 1.
Left-hand speaker
Connect both terminals tn the car
body or to a metal part in contact
with the body.
After all the other leads have been
connected, connect both terminals
to the positive (+) terminal of the
battery
Note 1.
Connection of the speaks1 leads for two channels Istereo)
is different from connection of the speaker leads for one
channel (monol. (See 'Connecting the Speaker Leads' on
page 10.)
DIN connection cord
for power amplifier
Isold separateiyi
rp*
Car stereo with
UN socket*
(Rear of amplifier)
Fuse(30AI
Red
Fuse (30A)
__.
Connecrtothe positive (+) terminal
Yellow/Black (C|0Cj< illumination, small lamp
circuits, etc.I of the car's lighting
switch.
|
| i
RedfBlack To e|ectrjc, terminal controlled by
Fuse (3AI
ignition switch (12 V DC) ON/OFF.
Gromment
1 2