Pioneer GM-A4704 Manuel du propriétaire - Page 12

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Pioneer GM-A4704. Pioneer GM-A4704 19 pages. Bridgeable four-channel power amplifier
Également pour Pioneer GM-A4704 : Manuel du propriétaire (33 pages)

Imprimer la page

(Connecting the units

)

Connecting the power

terminal

The use of a special red battery and ground

wire RD-223 (sold separately) is recom-

mended. Connect the battery wire directly to

the car battery positive terminal

~and

the

ground wire to the car body.

wARNING

If the battery wire is not securely fixed to the term-

inal using the terminal screws, there is a risk of

overheating, malfunction and injury, including

minor burns.

Route battery wire from engine com-

partment to the vehicle interior.

•

When drilling a cable pass-hole into the ve-

hicle body and routing a battery wire thor-

ough it, take care not to short-circuit the

wire damaging it by the cut edges or burrs

of the hole.

After completing all other am pi ifier con nec-

tions, finally connect the battery wire terminal

of the amplifier to the

positive~

battery term-

inal.

Positive® terminal

Engine compartment

Vehicle interior

Fuse

(30

Insert the 0-ring rubber grommet into the

vehicle body.

Drill a 14 mm (1/2 in.) hole into the vehicle

body.

Twist the battery wire, ground wire

and system remote control wire.

Twist

------.w~

Attach lugs to wire ends.

Use pliers, etc., to crimp lugs to wires.

~~~

"'Y.~~~~

~, \\

® "''

Lug (sold separately)

Battery wire

Ground wire

Connect the wires to the terminal.

Fix the wires securely with the terminal

screws.

System remote control terminal

Ground terminal

Power terminal

@ Terminal screws

Battery wire

Ground wire

(JJ System remote control wire

C!J