Pioneer GM-A6704/XEVES Manuel d'entretien - Page 3
Parcourez en ligne ou téléchargez le pdf Manuel d'entretien pour {nom_de_la_catégorie} Pioneer GM-A6704/XEVES. Pioneer GM-A6704/XEVES 23 pages. Bridgeable four-channel power amplifier
Imprimer la page
5
1. SERVICE PRECAUTIONS
1.1 SAFETY PRECAUTIONS
You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and
should keep the safety during servicing by following the safety instructions described in this manual.
Heat sink becomes hot areas. Be careful not to burn yourself.
1.2 NOTES ON DISASSEMBLY / ASSEMBLY
Before disassembling the unit, be sure to turn off the power. Unplugging and plugging the connectors during power-on
mode may damage the ICs inside the unit.
Please be sure to conduct line process to original status if you make assembling after repair.
When you tighten the screws of following figure, tightly hold a transistor or a diode to be fixed to prevent the part
from turning by the force of tightening the screw.
(If the part turned, a stress will be applied to the solder and may cause a failure such as a solder crack.)
Please install Insulator between Power Transistor and Heat Sink when you install Power Transistor in Heat Sink.
If Insulator is not installed between Power Transistor and Heat Sink, Power Transistor might be damaged.
5
6
HEAT SINK
GM-A6704/XEUC
6
7
7
8
A
B
C
D
E
F
3
8