Pioneer GM-D500M Manuel du propriétaire

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Pioneer GM-D500M. Pioneer GM-D500M 6 pages. Owners manual
Également pour Pioneer GM-D500M : Manuel d'entretien (26 pages)

Imprimer la page

CLASS D MONO AMPLIFIER

AMPLIFICADOR MONO DE CLASE D

Owner's Manual

GM-D500M

Manual del Propietario

PIONEER CORPORATION

4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN

PIONEER ELECTRONICS (USA) INC.

P.O. Box 1540, Long Beach, California 90801-1540, U.S.A.

TEL: (800) 421-1404

PIONEER EUROPE NV

Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium

TEL: (0) 3/570.05.11

PIONEER ELECTRONICS ASIACENTRE PTE. LTD.

253 Alexandra Road, #04-01, Singapore 159936

TEL: 65-6472-1111

PIONEER ELECTRONICS AUSTRALIA PTY. LTD.

178-184 Boundary Road, Braeside, Victoria 3195, Australia

TEL: (03) 9586-6300

Published by Pioneer Corporation.

PIONEER ELECTRONICS OF CANADA, INC.

300 Allstate Parkway, Markham, Ontario L3R OP2, Canada

TEL: (905) 479-4411

Publicado por Pioneer Corporation.

PIONEER ELECTRONICS DE MEXICO, S.A. de C.V.

San Lorenzo 1009 3er. Piso Desp. 302

Col. Del Valle Mexico, D.F. C.P. 03100

TEL: 55-5688-52-90

Printed in U.S.A.

Impreso en los EE.UU.

<HRD0207-A> ES

Before Using This Product

Thank you for purchasing this PIONEER

WARNING

product. Before attempting operation, be

sure to read this manual.

• Always use the special red battery and ground

wire [RD-223], which is sold separately. Connect

In case of trouble

the battery wire directly to the car battery positive

terminal (+) and the ground wire to the car body.

• Do not touch the amplifier with wet hands.

When the unit does not operate properly,

Otherwise you may get an electric shock. Also, do

contact your dealer or the nearest autho-

not touch the amplifier when it is wet.

rized PIONEER Service Station.

• For traffic safety and to maintain safe driving

conditions, keep the volume low enough so that

About This Product

you can still hear normal traffic sound.

• Check the connections of the power supply and

This product is a class D amplifier for the

subwoofer if the fuse of the separately sold bat-

subwoofer. If both L (left) and R (right)

tery wire or the amplifier fuse blows. Detect the

channels are connected to the RCA input

cause and solve the problem, then replace the fuse

of this product, output is mixed because

with another one of the same size and rating.

this product is a mono amplifier.

• To prevent malfunction of the amplifier and sub-

woofer, the protective circuit will cut the power

supply to the amplifier (sound will stop) when an

abnormal condition occurs. In such a case, switch

the power to the system OFF and check the

connection of the power supply and subwoofer.

Detect the cause and solve the problem.

• Contact the dealer if you cannot detect the cause.

• To prevent an electric shock or short-circuit

during connection and installation, be sure to

disconnect the negative (–) terminal of the battery

beforehand.

• Confirm that no parts are behind the panel when

drilling a hole for installation of the amplifier. Be

sure to protect all cables and important equipment

such as fuel lines, brake lines and the electrical

wiring from damage.

Setting the Unit

Bass Level Control

If the sound level is too low, even when

the volume of the car stereo used along

with this power amplifier is turned up,

turn bass level control on the front of the

power amplifier clockwise. If the sound

distorts when the volume is turned up,

turn the bass level control counter-clock-

wise.

• When using with an RCA equipped car

stereo (standard output of 500 mV), set to

the NORMAL position. When using with

an RCA equipped Pioneer car stereo with

max. output of 4 V or more, adjust level to

match the car stereo output level.

• When you want to boost bass, turn the bass

level control clockwise.

BFC (Beat Frequency Control) Switch

If you hear a beat while listening to an

AM broadcast with your car stereo,

change the BFC switch using a small

standard tip screwdriver.

Cut Off Frequency Control

You can select a cut off frequency from

40 to 240 Hz.

Power Indicator

The power indicator lights when the

power is switched on.