Pioneer GM-X404 Manuel du propriétaire - Page 5

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Pioneer GM-X404. Pioneer GM-X404 22 pages. Bridgeable four-channel power amplifier
Également pour Pioneer GM-X404 : Manuel d'entretien (18 pages), Manuel d'entretien (17 pages)

Imprimer la page

Symbols

The following two symbols are used in this

manual.

CAUTION

— never do this.

This symbol indicates dangerous

actions which must be avoided.

Note

— follow the instructions care-

fully.

This symbol indicates action which can

cause the equipment to fail if it is

wrongly performed.

WARNING

• For traffic safety and to maintain safe

driving conditions, keep the volume low

enough so that you can still hear normal

traffic sound.

• Check the connections of the power

supply and speakers if the fuse of the sold

separately special red battery wire [RD-

222] or the amplifier fuse blows. Detect

the cause and solve the problem, then

replace the fuse with another one of the

same size and rating.

• To prevent malfunction of the amplifier

and speakers, the protective circuit will

cut the power supply to the amplifier

(sound will stop) when an abnormal

condition occurs. In such a case, switch

the power of the system OFF, check

connection of the power supply and

speakers. Detect the cause and solve the

problem.

• Contact the dealer if you cannot detect

the cause.

• To prevent electric shock or short-circuit

during connection and installation, be

sure to disconnect the negative (–)

terminal of the battery beforehand.

• Always use the special red battery power

and ground wire [RD-222], which is sold

separately. Connect the special red

battery power wire directly to the car

battery and the black ground wire to the

car body. (The special red battery power

and ground wire [RD-222] are designed

so that the amplifier can be connected

safely.)

• Confirm that no parts are behind the

panel when drilling a hole for installation

of the amplifier. Be sure to protect all

cables and important equipment such as

fuel lines, brake lines and the electrical

wiring from damage.

• To ensure proper heat dissipation of the

amplifier, take care of the following

during installation.

— Allow adequate space above the

amplifier for proper ventilation.

— Do not cover the amplifier with a floor

mat or carpet.