Pioneer PREMIER PRS-D1200M Manuel du propriétaire - Page 17
Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Pioneer PREMIER PRS-D1200M. Pioneer PREMIER PRS-D1200M 50 pages. Class d mono amplifier
Également pour Pioneer PREMIER PRS-D1200M : Manuel du propriétaire (20 pages)
Imprimer la page
Specifications
Power source ........................................................................................................ 14.4 V DC (10.8 V to 15.1 V allowable)
Grounding system .......................................................................................................................................... Negative type
Current consumption ........................................................................................................ 39 A (at continuous power, 4 Ω)
Average current drawn* .......................................................................................................... 12 A (4 Ω for one channel)
Fuse ........................................................................................................................................................................ 40 A × 2
Dimensions ........................................................................................................ 301 (W) mm × 57 (H) mm × 213 (D) mm
Weight .................................................................................................... 3.5 kg (7.7 lbs.) (Leads for wiring not included)
Maximum power output ................................................................................ 800 W × 1 (4 Ω) / 1 200 W × 1 (1 Ω to 2 Ω)
Continuous power (14.4 V) ...................................... NORMAL mode: 4 Ω, 20 Hz to 240 Hz,
Load impedance ........................................................................................................................ 4 Ω (1 Ω to 8 Ω allowable)
Frequency response .......................................................................................................... 10 Hz to 240 Hz (+0 dB, –3 dB)
S/N ratio ........................................................................................................................................ 92 dB (IHF-A network)
Distortion .......................................................................................................................................... 0.5 % (10 W, 100 Hz)
Low pass filter ............................................................................................................ Cut off frequency: 40 Hz to 240 Hz
Subsonic filter (HPF) .............................................................................................................................. Frequency: 20 Hz
Bass boost ................................................................................................................................................ Frequency: 50 Hz
Gain control .................................................................................................................................... RCA: 400 mV to 6.5 V
Maximum input level / impedance ...................................................................................................... RCA: 6.5 V / 22 kΩ
Power output .......................................................... NORMAL mode: 400 W RMS × 1 channel
S/N ratio ................................................................................ 66 dBA (reference: 1 W into 4 Ω)
Note:
• Specifications and the design are subject to possible modification without notice
due to improvements.
*Average current drawn
• The average current drawn is nearly the maximum current drawn by this unit
when an audio signal is input. Use this value when working out total current
drawn by multiple power amplifiers.
HI-CURRENT mode: 4 Ω, 20 Hz to 240 Hz,
(at 4 Ω and
600 W RMS × 1 channel
(at 100 Hz , 2 Ω and
HI-CURRENT mode: 150 W RMS × 1 channel
(at 4 Ω and
300 W RMS × 1 channel
(at 100 Hz , 2 Ω and
600 W RMS × 1 channel
(at 100 Hz , 1 Ω and
20 A (2 Ω for one channel)
28 A (1 Ω for one channel)
[12 (W) in. × 2-1/4 (H) in. × 8-3/8 (D) in.]
1.0% THD, 400 W × 1
2 Ω, 100 Hz,
1.0% THD, 600 W × 1
1.0% THD, 150 W × 1
2 Ω, 100 Hz,
1.0% THD, 300 W × 1
1 Ω, 100 Hz,
1.0% THD, 600 W × 1
Cut off slope: –18 dB/oct
Level: 0 / 6 / 9 / 12 dB
SP: 1.6 V to 26 V
SP: 26 V / 90 kΩ
1% THD+N)
1% THD+N)
1% THD+N)
1% THD+N)
1% THD+N)
Slope: –18 dB
16